|
摘要：
|
|
在温成形过程中铝合金板与模具表面的接触和摩擦行为十分复杂,不同的接触区域摩擦状况不尽相同。分析了板料成形中摩擦测量的国内外发展状况,采用自行设计的新型摩擦测量装置完成了铝合金板温成形过程中拉深筋处摩擦系数的测量。该测量装置的特点是可以模拟板料的真实变形过程,采用楔形铝合金板试件,通过楔形槽产生周向挤压,来模拟法兰区板料成形时的增厚趋势,添加了加温和温控装置来模拟温成形时的温度环境,从而获得更为准确的测量结果。
|
|
The contact and friction behavior between aluminum alloy sheet and die surface in warm forming is very complicated.Friction status varies in different contact areas.The researches on tribotest for sheet metal forming were introduced.A new friction coefficient measurement device was developed to measure the friction coefficient at drawbead in aluminum alloy sheet warm forming.The feature of the measuring device was that the real forming process of the sheet metal could be modeled during the measurement.The aluminum alloy sheet sample with wedge-shaped edge was adopted to get the circumferential compressive stress exerted by the cuneal groove.A number of heating rods and the temperature control were adopted to simulate the temperature of warm forming.Therefore,more accurate results could be obtained.
|
|
基金项目：
|
|
美国通用汽车公司资助研究项目
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Cavaliere P.Hot and warm forming of 2618 aluminum alloy[J].Journal of Light Metals,2002,2:247 252.
[2]Darendeliler H,Altan T.Analysis of axisymmetric cup draw-ingin relation to friction[J].J.Materials Processing Tech-nology,1996,58:293 301.
[3]Nine HD.Drawbead Forcein Sheet Metal Forming[A].Me-chanics of Sheet Metal orming[C],New York:PlenumPress,1978.
[4]Duncan J L,School B S,Filho J G.A Tensile Strip Test for E-valuating Frictionin Sheet Metal Forming[R].SAE Techni-cal Paper,1978,No.780391.
[5]Wang W,Wagoner R H,Wang X J.A Realistic Friction Testfor Sheet Forming Operations[J].SAE Trans.of Materials&Manufacturing,1993,930807:915 922.
[6]Saha P K,Wilson W R D.Influence of Plastic Strain on Fric-tion in Sheet Metal Forming[J].Wear,1994,172:167173.
[7]Hus T C,Liu C C.“Internal Variable”Effects in Punch Fric-tion Characterization[J].Trans.of ASME,J.of Tribology,1998,121:510 516.
[8]Sanchez L R.Characterisation of a measurement systemfor re-producible friction testing on sheet metal under plane strain[J].Tribology International,1999,32(10):575 586.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
