|
摘要：
|
|
盘环套类锻件几何形状相似,在传统尺寸范围划分上存在重叠及空白区域,给该类锻件CAPP系统自动决策带来困难。本文从锻造企业的生产实际出发,对盘环套类锻件尺寸范围进行了调整和完善,并结合锻造CAPP系统的开发,在锻件类型自动判定、变形工步自动决策等方面做了一定探讨。根据调整后的盘环套类锻件尺寸范围及变形工步,开发了盘环套类的锻造CAPP决策系统,经有关厂家实际使用效果良好。
|
|
Disc-ring sleeve forgings are similar in their shapes,and there exist overlaps and blank region in the traditional size scope division.So it is difficult for the forging CAPP system to make a decision automatically.Based on actual production in the forging enterprise,the disc-ring sleeve forging size scope was adjusted and consummated,and an investigation on the aspects of the automatic decision-making method of forging type and deforming procedures combined with the development of forging CAPP system was made.According to the adjusted size scope and deforming procedure of the disc-ring sleeve forging,the forging CAPP system was developed successfully.Its applied result in the related enterprises indicates that the system is of certain usability.
|
|
基金项目：
|
|
南京工程学院科研基金资助项目(K06-07)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]赵汝嘉.计算机辅助工艺设计(CAPP)[M].北京:机械工业出版社,1995.
[2]周大隽.锻压技术数据手册[M].北京:机械工业出版社,1998.
[3]黄阳,朱育林,李东波.锻造CAPP专家系统生成技术的研制[J].机电产品的开发与创新,2006,19(6):79-80.
[4]李鸿吉.VB6.0编程方法详解[M].北京:科学出版社,2002.
[5]王大康,刘永峰,石亚宁.智能化CAPP系统的工艺决策[J].北京工业大学学报,2003,29(2):129-132.
[6]李集仁,杨良伟.锻工实用技术手册[M].江苏:江苏科学技术出版社,2002.
[7]高骏.锻造类型CAPP系统研究与开发[D].南京:南京理工大学,2003.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
