|
摘要：
|
|
立足于国内外半固态加工应用现状,对其未来发展作了一种较乐观的预测。即目前应用于工业领域的铝合金触变压铸、铝合金触变模锻和镁合金射注等工艺过程是有效的。但应用有限的瓶颈问题,乃是制坯技术。必须使制坯技术高效、优质和低成本,才能使半固态加工技术有一个较大发展。
|
|
The authors forecast the development of semi-solid forming optimistically in the future based on the application actuality of it in China or abroad.Presently the technologies of thixocasting,thixoforging of aluminum alloy and injection of magnesium alloy applied in industries are available.But the bottleneck of application limit is the technique of performing.If Semi-Solid Forming makes great progress,the performing must be high efficiency,high quality and low cost.So we propose that the scholars should make new efforts under the comment "hope of Semi-Solid Forming being in China",and especially reach a new application level.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Anacleto de figueredo.Science and technology of semi-solidmetal processing[C].Worcester Polytechnic InstituteWorcester,MA,2004.
[2]毛卫民.半固态金属成形技术[M].北京:机械工业出版社,2004.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
