|
摘要：
|
|
针对曲柄压力机高速化所带来的振动加剧问题,以JF75G-125型曲柄压力机为例,建立力学模型,用解析法分析了曲柄滑块机构惯性力产生的原因,采用对称布置法实现动平衡。建立了曲柄压力机在ADAMS中的动力学模型,采用二次优化法进行动平衡优化,对优化后的压力机模型进行了仿真,并利用ADAMS的后置处理模块对动态惯性力进行测试和分析,在此基础上,对曲柄压力机优化前后的动力学参数进行比较和分析,提出了压力机的动平衡优化改进方案。
|
|
To alleviate the vibration of high speed crank press,based on JF75G-125 type of press,a mathematical model for Slider-Crank system is established and the kinematic and dynamic properties are analyzed with analytic method.The dynamic balance is complimented by symmetry deign.A dynamic model is built up for Slider-Crank system in ADAMS(Automatic Dynamic Analysis of Mechanical Systems).Balanced by quadratic optimization,inertial forces of the optimized model have been tested and analyzed in ADAMS/ PostProcessor.On the basis of above,dynamic properties between the improved and unimproved crank press are compared and analyzed.Finally,an improved solution of crank press is presented.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Neumann M,Hahn H.Computer simulation and dynamic anal-ysis of a mechanical press based on different engineer models[J].Math.Comput.Simul.,1998(46):559 574.
[2]Chiou S T,Bai G J,Chang W K.Optimum balancing designs ofthe drag-link drive of mechanical presses for precision cutting[J].Int.J.Mach.Tools Manuf.,1998,38(3):131 141.
[3]黄锡恺,郑文纬.机械原理[M].北京:高等教育出版社,1981.
[4]周文.高速曲柄压力机的动平衡[J].锻压机械,1998,(5):22 23.
[5]宋小华.机械压力机动力学仿真分析和虚拟样机研究[D].浙江:浙江工业大学,2005.
[6]蔺海鸥.高速压力机的振动研究及计算机仿真[D].陕西:西安理工大学,2005.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
