|
摘要：
|
|
内孔翻边是冲压成形生产中的一个常用工序,变形区的变形特征是一种物理和几何非线形的变形过程。用主应力法对内孔翻边成形过程中变形区的应力、应变及模具上的受力进行了理论分析,得出了变形区的应力、应变随冲模斜角的变化规律。结合具体算例,用ADINA软件模拟了变形区的应力、应变及模具上的受力,得出了与理论分析相同的结论,即翻边使变形区变薄;材料会沿径向收缩;冲模斜角越大,孔边缘处等效应变越大,冲压力也越大。
|
|
Inner-hole burring form process is a common procedure in forming process and the distortion feature in strain zones is also a physical and geometry non- linear combination distortion process.The stress,strain and the mold force are analyzed by using the main stress method and the stress strain change rule along with the die angle of the inside hole flange forming area is obtained.Using concrete calculated example,the stress,strain and the mold stress are simulated with ADINA software.It is shown that the simulation results of the stress strain change rule along with the die angle are in good accordance with that of the main stress method.The material is becoming thinner and contracts in radius direction with burring,the bigger the die angle,the larger the strain of the hole edge and the force on die are.
|
|
基金项目：
|
|
河南省教育厅科技攻关项目(20011046)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]岛进,小寺秀俊,村上浩隆.フレキシペルスセシペルスヒニンダ加工法と开发[J].塑性と加工,1997-1999,38(440):40 44.
[2]Johnbson W.Plane strain slip-line fields for metal deformation[M].Process.Pergamon Press,1982.
[3]克索夫EП.金属塑性变形理论[M].北京:机械工业出版社,1992.
[4]梁柄文,胡世光.板料成形塑性理论[M].北京:机械工业出版社,1979.
[5]汪大年.金属塑性成形原理[M].北京:机械工业出版社,1993.
[6]李哲岩,张永曙.变分法及其应用[M].西安:西北工业大学出版社,1989.
[7]钟春生,韩静涛.金属塑性变形力,计算基础[M].北京:冶金工业出版社,1994.
[8]林治平.上限法在塑性加工工艺中的应用[M].北京:中国铁道出版社,1991.
[9]Blachut J B,Galletly G D.Buckling strength of i mperfect steelhemispheres[J].Thin-Walled Structures,1995,23(1 4):1 20.
[10]ParkShiro Kobayashi J J.Three-di mensional finite element a-nalysis of block compression[J].International Journal of Me-chanical Sciences,1984,(26):165 176.
[11]徐远杰.Tresca与Mises屈服理论值的比较[J].力学与实践,1994,(5):62 63.
[12]魏祖健,等.非线性弹性及全量弹塑性有限元分析中的一致切线模量[J].应用力学学报,1992,(19):70 76.
[13]Si mo J C.Aframe workfor finites trainelast oplasticity plasticdis-sipation and the multiplication decomposition Part1[J].Comput.Meths.Appl.Mech.Eng.,1988,66:199 219.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
