|
摘要：
|
|
基于精密冲裁的三向压应力状态纯剪切变形机理,结合普通复合模套冲工艺思想,提出增压转子挡圈的精密套冲成形新工艺,利用数值模拟软件Deform-3D对关键成形工步进行模拟,指导模具结构参数优化,并进行物理验证,获得了合格的零件。本工艺是传统精冲技术与普通冲裁工艺的一次接合应用,也是为其他领域更多复合技术创新的一次尝试。同时,该工艺提高了材料利用率,降低了产品成本。
|
|
Based on the pure cutting deformation mechanism of fine blanking,combining with the idea of common compound die punching technology,a new forming process of the pressure rotor and fender ring is put forward.And adopting the simulation software Deform-3D,a simulation of the pivotal forming step is executed,which is used to optimize the parameters of die structure.At last,it is proved physically and brings eligible products.The new technology researched in this subject is a combined application in the field of fine blanking and sheet punching,as well as a try of technology innovation in some other domains.Synchronously,the actualization of the new technology increases the material ratio,reduces manufacture cost,and brings vast economical efficiency.
|
|
基金项目：
|
|
北京机电所基金项目(2405005)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]涂光淇.精冲技术[M].北京:机械工业出版社,2005.
[2](德)罗特尔.厚板精冲[M].北京:机械工业出版社,1991.
[3]Klocke F,Sweeney K,Raedt H W.I mproved tool design forfine blanking through the application of numerical modelingtechniques[J].Journal of Materials Processing Technology,2001,115(1):70 75.
[4]Lee T C,Chan L C,Zheng P F.Application of the finite-ele-ment deformation method in the fine blanking process[J].Journal of Materials Processing Technology,1997,63(13):744 749.
[5]Hambli R.Finite element model fracture prediction duringsheet-metal blanking processes[J].Engineering Fracture Me-chanics,2000,68(3):365 378.
[6]程万军,何忠保,刘化民.齿圈压板精密冲裁的力学分析[J].锻压技术,2001,(4):20 21.
[7]彭群,赵彦启,李荣洪,等.强力压边精冲技术的数值模拟[J].锻压技术,2004,(4):23 25.
[8]贾建军,彭颖红,阮雪榆.精冲断裂过程的有限元模拟[J].上海交通大学学报,2003,(7):1064 1067.
[9]方刚,曾攀.金属板料冲裁过程的有限元模拟[J].金属学报,2001,(6):653 657.
[10]黄荣学,曹建国,范洪远,等.厚板精密冲裁工艺过程的有限元模拟[J].模具制造,2005,(3):12 14.
[11]周开华.扬起中国汽车精冲技术的风帆[C].2006中国国际金属切割、冲压、成形、制作会议论文集.2006.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
