|
摘要：
|
|
通过采用实验,研究了空心双拐曲轴内高压成形中压力参数的作用,完成了不同补料压力下的工艺实验,并对起皱,开裂等缺陷的产生原因进行了分析,确定了内高压成形空心双拐曲轴的成形区间,指出了摩擦润滑在内高压成形中重要性。
|
|
Tube hydroforming is a process to manufacture lightweight components,especially automotive parts,with advantages of cost and weight reduction,better structural integrity and increased strength and stiffness over the conventional process.In this paper,an investigation is conducted to the effect of the feeding pressure on experiment of hollow crankshaft hydroforming.One of typical failure modes such as wrinkling and splitting occurred due to unreasonable pressure is analyzed.The zone of hydroforming process window is confirmed.The important of friction lubrication in tube hydromorming is pointed out.
|
|
基金项目：
|
|
哈尔滨工业大学校基金(HIT.2003.08);;
华中科技大学塑性成形模拟及模具技术国家重点实验室开放基金(05-7)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Ahmetoglu M,Sutter K,Li XJ,et al.Tube hydroforming:current research,applications and need for training[J].Journal of Materials Processing Technology,2000,98(2):224 331.
[2]Dohman F,Hartl C.Hydroforming:Research and practicalapplication[C].Proceedings of 2th International Conferenceon Innovations in Hydroforming Technology,Ohio,USA,1997.
[3]Yuan S J,Lang L H,Wang X S,Wang Z R.Experi ment andnumerical si mulation of aluminum tube hydroforming[C].Proceedings of 2nd International Conference on Hydroforming,Fellbach,Germany,2001:339 349.
[4]Koc M,Altan T.An overall review of the tube hydroforming(THF)technology[J].Journal of Materials ProcessingTechnology,2001,108(3):384 393.
[5]Kleiner M,Homberg W,Brosius A.Process and control ofsheet metal hydroforming[C].Proceedings of 6th Interna-tional Conference on Technology of Plasticity,Nuremberg,Germeny,1999:1243 1252.
[6]Yuan S J,Wang XS,Liu G,et al.Research on hydroformingof tubular components with changeable cross-sections[C].Processing of International Conference on Technology of Plas-ticity,Yokohama,Japan,2002.
[7]Altan T.Jirathearanat S,Strano M.Adaptive FEMsi mulationfor hydroformingtubes[C].Proceedings of 2ndInternationalConference on Hydroforming.Fellbach,Germany,2001:363 384.
[8]Yuan S J,Wang X S,Liu G,et al.Wang.Research on hydro-forming of tubular components with changeable cross-sections[C].Advanced Technology of Plasticity,Proceedings of the7thICTP,Yokohama,Japan,October.27th-November.1st,2002:1495 1500.
[9]Vollertsen,F,Prange T,Sander M.Hydroforming:need,developments and perspectives[C].Proceedings of 6th Inter-national Conference on Technology of Plasticity,Nuremberg,Germany,1999:1197 1209.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
