|
摘要：
|
|
无模液压胀形是对封闭壳体施加内压力的一种成形方式。本文描述了用近足球型封闭壳体的无模内压胀形过程,实测了典型点的应变变化情况,壳体最终成为球形。实验结果表明,虽然各处减薄量不等,但变薄率均小于3.86%。
|
|
Dieless hydro-bulging is a forming technology under inner liquid pressure applied to closed shell.The process of dieless hydro-bulging near soccer-shape closed shell is described in this paper.The deformation of typical points on the shell is measured.Finally,the preform becomes a soccer shell.The experimental results show that the maximum thickness thinning ratio is less than 3.86%,although it is not uniform in different points.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]王仲仁.球形压力容器成形方法[P].中国专利:85106571.6,1988 8 25.
[2]Wang Z R,Zhi Y S,Zeng Y S,Yuan S J.Experimental re-search and finite-element simulation of plates hydrobulging inpairs[J].International Journal of Pressure and Piping,1996,68(3):243 248.
[3]Yuan S J,Wang F Z,Wang Z R.Safety analysis of 200m3LPG spherical tank manufactured by the dieless hydro-formingprocess[J].Journal of Materials Processing Technology,1997,70:215 219.
[4]Zhang S H,Wang Z R.Investigation of the hydroforming ofspherical vessels from a new type of flat polyhedral shell[J].Journal of Materials Processing Technology,1994,42:7586.
[5]Zeng Y S,Wang Z R,Yuan S J.The numerical simulation ofthe integral hydrobulging of ellipsoidal shells[J].Journal ofMaterials Processing Technology,1997,72(3):358 362.
[6]Teng B G,Yuan S J,Wang Z R.Effect of initial structure onthe hydro-forming of toroidal shells[J].Journal of MaterialsProcessing Technology,2002,123(1):18 21.
[7]Wang F Z,Yuan S J,Zeng Y S,Wang Z R.Research into thedieless hydro-forming of non-uniform thickness spherical ves-sels[J].International Journal of Machine Tools and Manu-facture,1997,37(8):1123 1130.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
