|
摘要：
|
|
介绍了铅包铜复合丝的应用前景 ,通过实验探索了铅包铜复合丝挤压工艺参数对出丝速度的影响。分析了复合丝挤压缺陷产生的原因 ,并提出了解决问题的措施 ,试验得出的工艺参数可用于连续包覆挤压生产。
|
|
This paper introduces an applying future of Pb/Cu composite wire. The effect of clad-extrusion technological parameters on clad-extrusion velocity of Pb/Cu composite wire was investigated by test. According to large amount of tested results, the reasons that defects are formed in processing of clad-extrusion are being analyzed, and the measure of resolving problem is proposed. the technological parameters produced by test can be applied in continuous clad-extrusion.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
1 LAYolshina,VYaKudyakov,VGzyryanovAlead filmelectiodeonanaluminumsubstratetoserveasalead acidbatteryplateJournalofPowerSources,1999,78(1～2):84～87
2 JayBennyE ,DattaAjoy,MathewsCharles,BlanyerRichardPerfor manceofthehorizonadvancedlead acidbatteryProceedingsoftheAnnualBatteryConference,Jan11-131994
3 SiegmundAndreas,Prengaman,RDavidGridalloysforautomobilebat teriesinthenewmollenniumJOM 531Jan2001Minerals,MetalsandmaterialsSoc(TMS),38-39
4 Tortora,C NewtechnologyforleadacidbatteriesINTELEC ,Interna tionalTelecommunicationsEnergyConference,1989(6):15～18
5 MSaakes,EKluiters,DSchmal,SMourad,etadDevelopmentandtesingofabipolarlead acidbatteryforhybridelectricvehiclesJournalofPowerSource,1999,78(1～2):199～203
6 IKurisawa,MShiomi,SOhsumi,Mlwata,MTsubotaDevelopmentofpositiveelectrodeswithanSnO2 coatingbyapplyingasputteringtech niqueforlead acidbatteriesJournalofpowersources,2001,95(1～2):125～129
7 Blanyer,RichardJ Mathews,CharlesL Methodandapparatusforcoat ingacorematerialwithmetalUS46586231987
8 HawkesDJ,MorgenRE Conformextrusioncurrentmethodsandcapa bilitiesWireIndustry1991(6)
9 DawsonJR ,HawkesDJ ContinuoussheathingoffibreopticandCATVCanlesThe6thWireAsiaInternationalConferenceandExhibitionShang hai25th-28th,1994
10贾春博,刘元文等连续挤压包覆CATV同轴电缆芯线防灼伤系统研究锻压技术,2000,25(2)
11谢建新,刘静安著金属挤压理论与技术北京:冶金工业出版社,2001
12罗守靖著复合材料液态挤压北京:冶金工业出版社,2002.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
