|
摘要：
|
|
鉴于塑性成形过程复杂, 数值模拟工作量大而耗时, 指出塑性成形过程弹塑性力学、热力学及其耦合等问题的数值模拟应采用高效并行的计算方法。简要分析了并行与串行的特点, 简介了并行计算机和数值并行计算算法的发展概况, 简述了并行计算程序的设计过程, 对并行计算所涉及的关键性技术及性能评价指标进行了分析论述。简要叙述了近年来国内外在数值模拟并行计算领域特别是塑性成形过程的并行计算的研究进展, 提出一种数值模拟弹塑性接触问题的高效并行凝缩算法, 并对未来数值模拟并行计算的前景进行了展望。
|
|
Considering the complexity of metal forming process and the expensive time cost for its numerical simulation, it is explicitly pointed out that the elastic plastic and thermal dynamics and their coupling in metal forming process should be solved by highly efficient parallel computation methodThe characteristics of the parallel and serial computation are briefly analyzed and the evolution of parallel computer and numerical parallel computation are presentedThe process of designing a parallel computation program is expounded and the key techniques and parameters for evaluating performance of parallel computation are simply explicatedThe investigation and development in the domain of parallel numerical simulation are simply stated especially for metal forming processA new highly efficient parallel computation method of numerical simulation is specially put forward to solve the elastic plastic contact problemThe development of parallel numerical simulation in the future is predicted finally
|
|
基金项目：
|
|
国家自然科学基金 (50375117);;
陕西省自然科学基金 (03E204) 资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] 化春键三维弹塑性摩擦接触边界元法网络并行算法的研究[D]燕山大学工学硕士学位论文,2002:513
[2] 孙家昶,张林波,迟学斌,等网络并行计算与分布式编程环境[M]北京:科学出版社,1996:19,4157
[3] 李晓梅,蒋增荣,等并行算法=Parallel alogorithms[M]长沙:湖南科学技术出版社,1992:16
[4] 孙家昶并行化-大型科学工程计算的重要趋势[J]自然杂志,1992,15(8):569573
[5] HwangK,XuZ ScalableParallelComputing:Technology,Architecture,Programming[M]Beijing:ChinaMachinePress,1999:1117
[6] 孙家昶并行计算环境与数值并行算法研究[J]小型微型计算机系统,1995,(2):3539
[7] 刘小毛支持分布式超级计算的工作站群集系统[J]小型微型计算机系统,1995,(2):4552
[8] 尹欣三维弹性问题边界元法并行计算及其工程应用[D]清华大学工学博士学位论文,2000:116V
[9] 沈志宇,廖湘科,胡子昂并行程序设计[M]长沙:国防科技大学出版社,1997:911,89110
[10] NoorA K NewComputingSystems andFutureHigh-per formanceComputingEnvironment and theirImpact onStruc turalAnalysis andDesign[J]Computers andStructures,1997,64(1):130
[11] ZucchiniA ,MukherjeeS Vectorial and parallel processingin stress analysis with the boundary element method[J]In ternationalJournal forNumericalMethods inEngineering,1991,31:307317
[12] KaneJ H Boundary element analysis on vector and parallelcomputers[J]ComputingSystems inEngineering1994,5(3):239252
[13] DaoudiE M ,LobryJ Implementation of a boundary ele ment method on distributed memory computers[J]ParallelComputing,1992,18(12):13171324
[14] KreienmeyerM ,SteinE Parallel implementation of theboundary element method for linear elastic problems on aMIMD parallel computer[J]ComputationalMechanics,1995,15(4):342349
[15] KamiyaN ,IwaseH,KitaE Parallel implementation ofboundary element method with domain decomposi tionEngineering[J ]Analysis withBoundaryElements,1996,18(3):209216
[16] KamiyaN ,IwaseH Computational efficiency of parallel bounda ry element analysis via domain decomposition[C]InternationalConfernceProceedings of the199712thInternationalConference onBoundaryElementTechnology,1997:343350
[17] KamiyaN ,IwaseH ,KitaE Performance evaluation of par allel boundary element analysis via domain decompositionmethod[J]EngineeringAnalysis withBoundaryElements,1996,18(3):217222
[18] KamiyaN,IwaseH ,KitaE Parallel adaptive boundary ele ment analysis[J]ComputerMethods inAppliedMechanicsandEngineering,1996,134(34):341350
[19] NatarajanR ,KrishnaswamyD A case study in parallel sci entific computing: the boundary element method on a distribu ted memory multicomputerEngineeringAnalysis withBoundaryElements,1996,18(3):183193
[20] BiaeckiR A,MerkelM,MewsH,KuhnG In and out of coreBEM equation solver with parallel and non linear options[J]InternationalJournal forNumericalMethods inEngineer ing,1996,39(24):42154242
[21] YangL S ,MachidoriH,ShirakawaT BEM andBEM withSOR on the parallel computerQCDPAX [J]EngineeringA nalysis withBoundaryElements,1996,18(3):231237
[22] GramaA,KumarV ,SamehA Parallel hierarchical solversand preconditioners for boundary element methods[J]SIAMJournal onScientificComputing,1998,20(1):337358
[23] 张博,周兴社,康继昌,等面向流场计算的PVM并行程序设计研究[J]航空学报,1997,(3):341344
[24] 杨晓辉,王正华,王承尧PVM平台下粗网格修正与拼接网格相匹配解超声速底部流场[J]数值计算与计算机应用,2000(3):4856
[25] 赵文涛,王正华,刘仲,等并行处理方法在液体火箭发动机三维数值模拟中的应用[J]国防科技大学学报,1999,(4):911
[26] 匡斌,李心友,王华忠,等三维有限差分深度偏移并行算法的设计和实现[J]同济大学学报(自然科学版),2000,(2):183188
[27] 黄孝成,廖道训分布式并行计算的力学计算模型[J]华中科技大学学报2001,(2):9395
[28] 余天堂,姜弘道基于PVM的网络并行子结构共轭梯度法[J]工程力学2001,(5):2935
[29] 王正华,赵文涛二维不可压流程序在PVM环境下的并行计算[J]空气动力学学报,2002,(S1):5963
[30] 刘杰,胡庆丰,韩国兴,等分布式存储环境下非平衡刚性方程组的数值并行计算[J]计算物理,2002,(1):8688
[31] 朱国林,徐庆新计算流体力学并行计算技术研究综述[J]空气动力学学报2002,(S1):16
[32] 乐志华,程建钢,姚振汉网络机群下多项式预处理EBE PCG并行算法设计与实现[J]工程力学,2002,(5):150155
[33] 王健,陈丙珍,何小荣针对复杂系统并行模拟问题的并发式多级矩阵重排算法[J]计算机与应用化学,2002,(5):589592
[34] YeT Q,WangR P,ZhangX S Boundary element analysisbyKrylov subspace method onMIMD parallel multiprocessorsystem[J]EngineeringAnalysis withBoundaryElements,1996,18(3):203208
[35] 姚振汉,杜庆华边界元法应用的若干近期研究及国际新进展[J]清华大学学报(自然科学版)2001,(Z1):8993
[36] 申光宪,化春键,刘德义三维弹塑性接触边界元网络并行解法[J]计算力学学报,2003,(5):530534
[37] 曹银锋,郑军,李光耀,钟志华薄板冲压成形过程的并行有限元仿真技术[J]机械工程学报,2003,(7):7983
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
