|
摘要：
|
|
通过研究航空座椅锁扣缸体的形状特点、零件的制造难度 ,确定了冷挤压成形零件的工艺方案 ,设计并制造冷挤压模具一套 ,生产出合格零件。演示并分析了零件的冷挤压变形过程 ;记录了冷挤压过程中与不同变形程度相对应的挤压力 ,绘制了冷挤压过程的连续挤压力曲线 ;对零件挤压方向的剖面进行了金属纤维组织观察 ,对零件流线分布进行了分析。
|
|
In this paper, an available cold\|extrusion process to shape the plane\|chair\|clasp cylinder was determined by studying its shape characteristics and fabricating difficulities. We also made a set of cold\|extrusion die and manufactured qualified parts. The shaping course of the parts was demonstrated and analysed;And the extrusion force to different transfiguration degree was recorded to draw the continuous extrusion force curve during the cold-extrusion course. We also observed the part section's metal fibre structure in the direction of extrusion force and gave a reasonable explanation to the flow line's distribution.
|
|
基金项目：
|
|
江西省教育厅基金资助项目
|
|
作者简介：
|
|
|
|
参考文献：
|
1 余仁钢等电器动触头零件冷挤压工艺及模具模具工业,2001(4):35～36
2 苏娟华等薄壁深孔件精密成形裂纹的研究锻压技术,2001(1):8～9
3 杨长顺冷挤压模具设计北京:国防工业出版社,1994.
4 [美]JN哈里斯金属压力加工理论与实践北京:清华大学出版社,1987.
5 PSRaghupathiColdExtrusionASMHandbook,1998,14:14～25
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
