锻压技术

基于有限元分析的汽车覆盖件模具设计及优化

英文标题：Design and optimization of the process and dies for the automobile body panel based on finite element analysis

作者：徐金波董湘怀

单位：华中科技大学塑性成形模拟与模具技术国家重点实验室华中科技大学塑性成形模拟与模具技术国家重点实验室 430074 430074

分类号：U466

出版年,卷(期):页码：2004,29(1):63-67

摘要：

介绍了静力隐式弹塑性有限元板料成形软件AutoForm的基本理论和关键技术。利用Auto Form软件实现了汽车覆盖件模具设计 ,包括模具压料面、工艺补充面以及拉延筋设计 ,完成了覆盖件成形过程模拟及优化 ,改变了传统的在有限元模拟后依靠CAD软件频繁进行模具修改的方法。在有限元软件内部实现了模具的参数化设计 ,既缩短了模具设计时间 ,又提高了模具设计可靠性

In this paper, the elastic plastic finite element method and key technical based on static implicit scheme for the simulation of the forming process of sheet metal are introduced. The design of the dies for the auto mobile body panel, including the design of the binder surface, addendum surface and drawbead, and the simulations of the forming process of the automobile body panel are implemented with the program AutoForm, which changs the traditional method that needs frequent modification of the dies with a CAD software after finite element simulation. Parameterized design of the die is realized in the finite element software, which shortens the die designing time and increases the reliability of the design.

基金项目：

参考文献：

1　WKubli,JReissner.Optimizationofsheet metalformingprocessusingthespecial purposeprogramAUTOFORM .JournalofMaterialProcessingTechnology,1995,292～305
2　MatthiasHillmann,WaldemarKubli.OptimizationofsheetmetalformingprocessesudingsimulationprogramsProcofNUMISHEET’99,1999:287～292
3　PHora(1),LTong(2),JReissner.ApredictionmethodforductilesheetmetalfailureinFE -SimulationProcofNUMISHEET’96,1996:252～256
4　郑莹,董湘怀,李尚键等板料冲压仿真系统设计北京:中国机械工程,1999(5)
5　王耕耘,王义林等.覆盖件模具CAD系统的研究北京:锻压技术,1997(4)

服务与反馈：

【文章下载】【加入收藏】