网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
基于最小缩口力条件下的缩口凹模倾角
英文标题:Inclined angle of contracting matrix based on minimum contracting force
作者:胡成武 邹安全 陈吉平 
单位:株洲工学院 湘潭工学院  株洲工学院 412008 
关键词:缩口成形  缩口力  缩口凹模倾角 
分类号:TG301
出版年,卷(期):页码:2004,29(2):64-66
摘要:
压缩失稳是薄壁筒形零件缩口成形时的主要失效形式。减小缩口力 ,避免产生压缩失稳 ,对顺利完成缩口成形过程具有重要的实际意义。应用金属塑性成型理论推导出圆筒形薄壁零件在缩口成形时 ,作用于毛坯直壁上的轴向应力最小时的缩口凹模倾角的数学表达式 ;并分析了摩擦系数对缩口凹模倾角的影响
Unstable compaction is the main failure form when thin wall cylindrical parts are shaped It is of great practical significance to smoothly finish the compaction shaping process by reducing the contracting force and avoiding unstable compaction Using the theory of metal plastic forming, the paper derives the formula of the inclined angle of contracting matrix when the axial stress reaches the minimum, which acts on the vertical wall of blanks during thin wall cylindrical parts being formed, and analyzes the effect of the friction factors on the inclined angle
基金项目:
湖南省重点学科建设项目资助 ;湘教通 [2 0 0 2 ] 67号
作者简介:
参考文献:
1 常荣福冲压成形中的摩擦分析北京:航空工业出版社,1989(7)229~230
2 胡成武基于轴对称屈曲失稳的缩口力与临界缩口尺寸锻压技术,2003(3)
3 斯德洛日夫MB ,波波夫EA ,吉林工业大学锻压教研室译金属塑性加工原理北京:机械工业出版社,1980:337~352
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9