|
摘要：
|
|
简要地介绍了环件冷辗扩原理、冷辗扩工艺、冷辗设备、加工过程控制参数、模具寿命及有限元模拟技术的现状和发展,并指出了环件冷辗扩还缺乏精确而系统性的研究,弹塑性有限元研究才刚刚起步,通过模拟来优化加工过程参数在国际上也几乎没有公开发表的文献。因此,应该从理论、有限元模拟、材料、设备、热处理、模具等多学科联合攻关研究,才能使我国的环件冷辗扩技术跃上一个新的台阶。
|
|
The current status and the development of the cold ring rolling theory, cold ring rolling technology, cold ring rolling equipment, production process control parameters, tooling life and finite element simulation technology are briefly introduced in this paper. It points out that there is no accurate and systematical research for the cold ring rolling and the elastic-plastic finite element analysis of cold ring rolling process is just starting. However, in our country the research of finite element simulation for cold ring rolling is blank. At the same time, there are few international publications which are related to optimizing the process parameters by simulation. Therefore, our cold ring rolling technology will jump to an advanced level only by the combined research of the theory, finite element simulation, raw material, equipment, heat treatment, tooling and other subjects.
|
|
基金项目：
|
|
国家自然科学基金重点项目(50335060)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1] 华林,黄兴高,朱春东.环件轧制理论和技术[M].北京机械工业出版社,2001.
[2] YangDY,KimKH,HawkyardJB.SimulationofT sectionpro fileringrollingbythe3Drigld plasticfiniteelementmethod[J.InternationlJournalofMechanicalSciences,1991,33(7):54550.
[3] MoussaG,HawkyardJB.lnvestigationintothemulti stagring.nrllingofaluminiumbicyclewheelrims[J].International JournalofMechanicalSciences,1986,28(12):841851.
[4] 田民,时大方,李新东.两种精密冷辗机床及工艺分析[J].轴承,2000(5):2426.
[5] 李斌.国内外冷辗环机特点分析[J],锻压机械,1997,(2):89.
[6] 揭晓岚,贺泰山,楼黎建.精密冷辗扩设备及工艺介绍[J].轴承,1994,(3):913.
[7] 靳光法.信息速递[J].机械工程师,2002,(1):1.
[8] LiuRG,LuY,DuQH,SunQR.Anewformingtechnologyfor bearingringsbymeansofprecisionrolling.JournalofMaterialsPro cessingTechnology,1995,52(24):515523.
[9] 陈聚伟.中小型深沟球轴承套圈冷辗扩工艺[J].轴承,2000,(5):2627.
[10] RyooJS,YangDY,JohnsonW..Adv.Techno.Plastic,1984,(2):12921298
[11] 华林.环件闭式轧制力和力矩上限计算[J].力学与实践,1994(3):3943.
[12] HawkyardJB,JohnsonW,KirklandJ,AppletonE.Analy sesforrollforceandtorqueinringrolling,withssomesup portingexperiments[J].InternationalJournalofMachani calSciences,1973,15(11):873893.
[13] MamalisAG,HakyardJB,JohnsonW.Onthepressure distributionbetweenstockandrollsinringrolling[J].Int.J.Mech.S[1] ci.,1976,4(18):184195.
[14] MamalisAG,JohnsonW,HawkyardJB.Pressuredistribu tion,rollforceandtorqueinringrolling[J].J.Mech.Eng.Sci.,1976,4(18):196209.
[15] yeay,koy,kimN,LeeJ.Predictionofspread,pressure distributionandrollforceinringrollingprocessusingrigid plasticfiniteelementmethod[J].JournalofMaterialsPro cessingTechnology,2003,140(13):478486
[16] 张猛,崔光杰.径向辗环进给速度规范的理论与应用研究[J].武汉钢铁学院学报,1994,(6):151157.
[17] 陈社伟,郝雪玲,史晓东.套圈精密辗压工艺参数设计[J].轴承,2000,(2):2224.
[18] NaksooKim,SusumuMachida,ShiroKobayshi.RingRolling ProcessSimulationbytheThreeDemensionFiniteElementMeth od[J].Int.J.Mach.Tools,1990,30(4):569577.
[19] DYK,YangKHkim,HawkyardJB.SimulationofT section profileringrollingbythe3DRigid PlasticFiniteElementMethod[J].IntJ.Mech.Sci,1991,33(7):541550.
[20] XuSG,LianJC,JBHawkyard.Simulationofringrolling usingarigid plasticfiniteelementmodel[J].International JournalofMachanicalSciences,1991,33(5):393～401
[21] 解春雷,李尚健,黄树槐.金属刚粘塑性变形的能量泛函与动力显式算法有限元分析[J].固体力学学报,1998,19(2)
[22] 罗洲,华林,王志慧,周勇强.环件轧制过程的显式有限元模拟分析[J].金属成形工艺,2003(6):1213.
[23] HuZM,PillingerI,HartleyP,McKenzieS,SpencePJ.Three dimensionalfinite elementmodeltingofringrolling[J].Journalof MaterialsProcessingTechnology,1994,45(14):143148.
[24] LimT,PillingerI,HartleyP.Afinite elementsimulation ofprofileringrollingusingahybridmeshmodel[J].Jour nalofMaterailsProcessingTechnology,1998,(8081):199205.
[25] SawamiphakdiK,PauskarPM,JinDQ,LahotiGD.Ring rollingprocessmodelingusingexplicitfiniteelementanalysis.AdvancedTechnologyofPlasticity,2002,(1).
[26] DaveyK,WardMJ.Apracticalmethodforfiniteelementringroll ingsimulationusingtheALEflowformulation[J].International JournalofMechanicalSciences,2002,44(1):165190.
[27] HiroshiUtsunomliya,YoshihiroSaito,TomoakiShinlda,lchiroTakasu.Elastic plasticfiniteelementanalysisofcold ringrollingprocess[J].JournalofMaterialsProcessing Technology,2002,125126:613618.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
