锻压技术

船舶钢板激光弯曲成形的实验研究

英文标题：Experimental study on laser bending of shipbuilding steel plate

作者：裴继斌张立文张全忠王存山董闯

单位：大连理工大学材料科学与工程学院大连理工大学材料科学与工程学院大连理工大学材料科学与工程学院大连理工大学材料科学与工程学院大连理工大学材料科学与工程学院辽宁大连116024 辽宁大连116024 辽宁大连116024 辽宁大连116024 辽宁大连116024

关键词：船舶钢板激光弯曲成形实验研究

分类号：U671;

出版年,卷(期):页码：2005,30(5):64-66

摘要：

在对船舶钢板激光弯曲成形过程进行实验研究中,采用CO2激光器研究了激光功率、扫描速度、扫描次数以及钢板厚度对船舶钢板激光弯曲成形的影响规律。实验中实时测量了船舶钢板激光弯曲成形过程钢板弯曲角度和温度的变化。结果表明:钢板弯曲角度随激光功率的增加而增加,随激光束扫描速度的增加而减小,而且随着钢板厚度的增加,弯曲角度减小;激光工艺参数和钢板厚度都对钢板激光多次扫描成形产生影响,钢板的弯曲角度随着激光扫描次数的增加而增加。对于较薄的船舶钢板,钢板弯曲角度随扫描次数增加近似呈线性增加,而较厚的钢板,随扫描次数的增加,钢板弯曲角度的增加逐渐减小。

Experiment on laser bending of shipbuilding steel plate is performed.The influence of laser power,scanning velocity,number of scanning passes and the thickness of the plates on bending angle is studied by CO_(2) laser.The measurement of real-time bending angle and temperature during the laser bending process of shipbuilding steel plate is carried out.The experimental results show that:(1) The bending angle is increased with the increase of the laser power and decreased with the increase of laser scanning speed.The bending angle is decreased with the thickness of the plate.(2) The multiple-irradiation laser bending process is affected by laser parameters and the thickness of the plate.The bending angle is increased with the number of scanning passes.A linear relationship between bending angle and the number of irradiations is observed for the relatively thin plate.While the increase of bending angle gradually is decreased with each additional laser scanning for the thicker plate.

基金项目：

国家自然科学基金资助项目(50075013)

参考文献：

[1]Scully K.Laser line heating[J].Journal of Ship Production,1987,3(4):237 246.
[2]Namba Y.Laser forming of metals and alloys[C].Proceed-ings of LAMP,1987:601 606.
[3]Geiger M,Vollertsen F.The mechanisms of laser forming[J].CIRP Annals,1993,42(1):301 304.
[4]Kyrsanidi A K,Kermanidis T B,Pantelakis S G.Numerical andexperimental investigation of the laser forming process[J].Jour-nal of Materials Processing Technology,1999,87:281 290.
[5]Hu Z,Labudovic M,Wang H,Kovacevic R.Computer sim-ulation and experimental investigation of sheet metal bendingusing laser beam scanning[J].International journal of Ma-chine Tools and Manufacture.2001,41:589 607.
[6]李纬民,李春科,刘助柏.板料成形新工艺———激光弯曲[J].锻压技术,1993,(6):29 31.
[7]王秀凤,胡世光,陈光南.板料激光成形技术[J].锻压技术,1998,(6):32 34
[8]李纬民,M.Geiger,F.Vollertsen.金属板材激光弯曲成形规律的研究[J].中国激光,1998,25(9):859 864.
[9]王秀凤,Janos Takacs,Gyorgy Krallics.薄板激光弯曲机理的研究[J].锻压技术,2001(4):29 30.
[10]陈敦军,向毅斌,吴诗,等.钛合金板料激光曲线弯曲及热辐射对其组织性能的影响[J].金属学报,2001,37(6):643 646.
[11]季忠,王忠雷,焦学健,等.板料激光弯曲成形工艺参数优化设计[J].锻压技术,2002,(6):38 41.
[12]管延锦,孙胜,栾贻国,等.板料激光弯曲成形角度的解析研究[J].光电子.激光,2004,(4):483 486.

服务与反馈：

【文章下载】【加入收藏】