锻压技术

基于瞬态法的铝合金与模具钢接触换热实验研究

英文标题：Experimental research on contact heat transfer between aluminum alloy and die steel based on transient method

作者：邢磊张立文张兴致岳重祥

关键词：7050铝合金瞬态法接触换热系数模具

分类号：TG311

出版年,卷(期):页码：2010,35(2):120-123

摘要：

采用瞬态实验法研究了7050铝合金与5CrMnMo模具钢界面间接触换热过程,探讨了接触载荷与模具温度对接触换热系数的影响,对比了瞬态法与稳态法的实验结果。研究表明,接触换热系数随时间延长迅速增大到某一基本恒定值;瞬态法与稳态法的结果存在一定差异,但接触换热系数随接触载荷增大而增加的趋势是一致的;在160~340℃温度范围内,接触换热系数随模具温度升高而增大,为实际锻造过程中模具的预热提供了参考数据。

The contact heat transfer between 7050 aluminum alloy and 5CrMnMo die steel was investigated using a transient method in the experiments.The effects of contact pressure and temperature of the die on contact heat transfer coefficient were discussed,and the experimental results of transient and steady state method were also compared.The research results indicate that the contact heat transfer coefficient increases rapidly to a level with the increasing time.The heat transfer coefficient according to the transient and steady state method increases with the increase of the contact pressure.The heat transfer coefficient in the transient condition also increases with the increasing temperature of the die in the range of 160-340 ℃,and these results provide some references for preheating of the die.

基金项目：

参考文献：

[1]Rosochowska M,Balendra R,Chodnikiewicz K.Measure-ments of thermal contact conductance[J].Journal of Materi-als Processing Technology,2003,135:204-210.
[2]康煜华,刘义伦,何玉辉.铝合金轧制过程中的热力耦合分析[J].锻压技术,2008,33(5):92-94.
[3]Marotta E E,Fletcher L S.Thermal contact conductance foraluminum and stainless steel contacts[J].Journal of Ther-mophysics and Heat Transfer,1998,12(3):374-381.
[4]Xu R P,Feng H D,Zhao L P,et al.Experimental investi-gation of thermal contact conductance at low temperaturebased on fractal description[J].International Communicationin Heat and Mass Transfer,2006,33(7):811-818.
[5]赵兰萍,徐烈.低温真空下固体界面间接触导热的实验研究[J].中国空间科学技术,2003,(1):51-55.
[6]张立文,朱德才,邢磊,等.铝合金与5CrMnMo模具钢界面接触换热系数实验研究[J].大连理工大学学报,2009,49(1):60-64.
[7]Beck J V,Blackwell B,Clair C R.Inverse heat conduction,Ill-posed problems[M].New York:Wiley-Verlag,1985.
[8]Jain V K.Determination of heat transfer coefficient for forg-ing applications[J].Journal of Materials Shaping Technolo-gy,1990,8(3):193-202.
[9]彭勋元,李翠仙.锻模温度对模具的影响[J].太原重型机械学院学报,1986,7(1):18-24.

服务与反馈：

【文章下载】【加入收藏】