|
摘要：
|
|
为研究多道次成形条件下薄壁筒形件滚珠旋压的成形机理,采用实验和有限元法相结合对薄壁筒形件多道次滚珠旋压的应力应变、旋压力和成形性进行了分析。结果表明:各道次下的等效应力和等效应变都是由旋压件的内表面向外表面逐渐增大,且随着旋压道次数的增加,等效应力和等效应变也都是逐渐增大;每道次的轴向旋压力随着滚珠行程的增加而增大,且各道次的旋压力也逐渐增大;多道次滚珠旋压时,由于采用较小的壁厚减薄量和材料的加工硬化,金属易于稳定流动,能够保证管坯的轴向伸长。因此,通过多道次滚珠旋压可实现大减薄量薄壁筒形件的旋压成形。
|
|
In order to study the ball spinning mechanism of thin-walled tube in the multi-pass condition,the stress and strain,the spinning force and the formability of thin-walled tube in multi-pass ball spinning were analyzed by combination of experiment and finite element method(FEM).The results show that with the increase of ball stroke in each pass,both the stress and the strain increase gradually from the inside surface to the outside surface of the spun part.Moreover,the stress and strain increase with the increase of spinning pass.The axial force in each pass increases with the increase of ball stroke and spinning pass.In the multi-pass ball spinning,steady flow of metal can be formed easily because of using small thickness reduction and work hardening of the material,which can ensure elongation of the tube.Therefore,the spinning of thin-walled tube with large thickness reduction can be realized through multi-pass ball spinning.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Zhang G L,Zhang S H,Li B,et al.Analysis on folding de-fects of inner grooved copper tubes during ball spin forming[J].Journal of Materials Processing Technology,2007,184(1-3):393-400.
[2]Tang Y,Chi Y,Chen J C,et al.Experimental study of oil-filled high-speed spin forming micro-groove fin-inside tubes[J].International Journal of Machine Tools and Manufac-ture,2007,(47):1059-1068.
[3]徐恒秋,樊桂森,张锐,等.旋压设备及工艺技术的应用与发展[J].新技术新工艺,2007,(2):6-8.
[4]张士宏,吴江.薄壁不锈钢管滚珠旋压成形工艺研究[J].锻压技术,2009,34(1):60-64.
[5]王淼,王忠堂,王本贤,等.轴向进给比对薄壁管滚珠旋压影响的有限元分析[J].沈阳理工大学学报,2007,26(2):30-33.
[6]Jiang S Y,Ren Z Y.Analysis of mechanics in ball spinning ofthin-walled tube[J].Chinese Journal of Mechanical Engi-neering,2008,21(1):25-30.
[7]江树勇,顾卫东,李春峰,等.纵向内筋薄壁筒反向滚珠旋压成形机理研究[J].锻压技术,2008,33(5):88-91.
[8]Jiang S Y,Zheng Y F,Ren Z Y,et al.Multi-pass spinning ofthin-walled tubular part with longitudinal inner rib[J].Transactions of Nonferrous Metals Society of China,2009,19(1):215-221.
[9]Jiang S Y,Xue K M,Li C F,et al.Spinning deformation cri-teria of thin-walled tubular part with longitudinal inner ribs[J].Journal of Wuhan University Technology-Mater Sci Ed,2006,21(4):169-172.
[10]Jiang S Y,Ren Z Y,Xue K M,et al.Application of BPANNfor prediction of backward ball spinning of thin-walled tubularpart with longitudinal inner ribs[J].Journal of MaterialsProcessing Technology,2008,196(1-3):190-196.
[11]李茂盛,康达昌,张士宏,等.滚珠旋压工艺中成形区接触压力的分析计算[J].材料科学与工艺,2004,12(2):125-128.
[12]Jiang S Y,Ren Z Y,Wu B,et al.General issues of FEM inbackward ball spinning of thin-walled tubular part with longi-tudinal inner ribs[J].Transactions of Nonferrous Metals So-ciety of China,2007,17(4):793-798.
[13]江树勇,薛克敏,李春峰,等.铝合金薄壁筒形件滚珠旋压成形分析[J].锻压技术,2005,30(4):24-26.
[14]江树勇,郑玉峰,赵立红,等.基于有限元法纵向内筋薄壁筒反向滚珠旋压分析[J].塑性工程学报,2009,16(2):81-85.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
