|
摘要：
|
|
摆动辗压作为锻造成形技术之一,具有节能、高效、低噪音等优点。该技术在国内外已经成为成形加工研究的热点,并在企业逐渐得到推广和应用。本文介绍了摆动辗压成形的工作原理、工艺特征以及摆动辗压设备及摆动辗压技术在国内外研究进展和应用现状,并对摆动辗压技术的未来发展趋势和方向进行了分析。
|
|
As a kind of forging technologies,orbital forming has many advantages,such as energy saving,high effectiveness and lower noise,etc.So the orbital forming is popularly studied and used internally and externally.The working principle and process characteristics of orbital-forming were introduced.And the research status and application about the orbital press and orbital forming process were also been outlined.At last,the development trends and direction of orbital forming were put forward.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]胡亚民.摆动辗压工艺及模具设计[M].重庆:重庆大学出版社,2008.
[2]胡亚民,车路长.PXW型摆辗机摆头运动轨迹研究[J].锻压技术,1993,18(3):25-29.
[3]蔡改贫,姜志宏,罗小燕,等.振动摆动辗压黏弹塑性统一本构关系研究及其滞回过程的模拟[J].中国机械工程,2008,19(15):1871-1874.
[4]江涛,翁海珊,蔡改贫,等.基于PLC控制的纵向振动摆动辗压系统的设计[J].液压与气动,2007,(1):42-45.
[5]程培元,卢志国,周鹏,等.四柱式摆动辗压机机身有限元分析探讨[J].锻压技术,2007,32(6):112-115.
[6]程培元,陈由红,周鹏,等.直齿锥齿轮毛坯形状摆辗成形三维数值模拟[J].锻压技术,2008,33(4):129-132.
[7]Sheu J J,Yu C H.The die failure prediction and preventionof the orbital forging process[J].Journal of Materials Pro-cessing Pechnology,2008,201:9-13.
[8]胡亚民.轴向齿圈摆辗成形技术[R].重庆:中国兵器工业第59研究所,1996.
[9]Nowak J,Madej L,Pietrzyk M,et al.Computer aidedtechnology design for the modified orbital forging[A].The9th International Conference on Technology of Plasticity[C].Gyeongju:korea,2008.
[10]Nowak J,Madej L,Ziolkiewicz S,et al.Recent develop-ment in orbital forging technology[J].Int.J.Mater Form,2008,1(S1):387-390.
[11]付建华.汽车半轴一火锻造工艺及设备[J].锻压机械,2002,(3):39-40.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
