|
摘要：
|
|
基于ANSYS/LS-DYNA分析平台构建多道次渐进成形的有限元模型。对圆台件的3道次成形过程进行模拟,从节点运动角度分析下沉现象产生的原因:节点产生径向运动的同时伴随有Z轴负向运动。通过不同成形参数圆台两道次成形过程的模拟,分析道次间夹角、工具头直径及Z轴进给量对下沉现象的影响。提出下沉现象解决方案:根据后续道次成形下沉量的大小调整前一道次成形深度,对多道次渐进成形路径的设计有重要意义。
|
|
The finite element model for multiple-stage incremental forming process of sheet metal was built based on ANSYS/LS-DYNA platform.The forming process of cone pad with three stages was simulated.The reason of subsidence was studied on the aspect of node's locomotion.It is found that node moves along negative direction of Z axis while there is a radial motion.The two-stage forming processes of cone pad with different parameters were simulated,and the influences of angle between paths,tool diameter and feed value of Z axis on subsidence were researched.The developed method to avoid subsidence phenomena was to modify the depth of pre-stage according to the subsidence value of subsequent stage,which has important sense to path designing for multiple-stage incremental forming process.
|
|
基金项目：
|
|
先进数控技术江苏省高校重点建设实验室开放基金项目(KXJ05017)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Jong Jin Park,Yung Ho Kim.Fundamental studies on the in-cremental sheet metal forming technique[J].Journal of Ma-terials Processing Technology,2003,140(1-3):447-453.
[2]Silva M B,Skjoedt M,Martins P A F,et al.Revisiting thefundamental of single point incremental forming by means ofmembrane analysis[J].International Journal of MachineTool&Manufacture,2008,48(1):73-83.
[3]倪向贵,吴恒安,王宇,等.各向异构本构关系在板料成形数值模拟中的应用[J].计算力学学报,2003,20(2):231-234.
[4]柳泽,傅沛福,李运兴,等.平面各向异性金属盒形件拉深过程的有限元模拟[J].塑性工程学报,1997,4(4):44-52.
[5]史艳莉,吴建军.各项异性屈服准则的发展及应用[J].锻压技术,2006,31(1):99-103.
[6]张秀娟,刘彦奎,魏延刚,等.各向异性铝合金板材本构关系及其有限元模拟[J].大连交通大学学报,2008,29(6):44-47.
[7]汤井伦,江五贵,黎军玩.各向异性屈服准则对铝合金板深冲起皱预测的影响[J].南昌航空工业学院学报,2006,20(4):59-63.
[8]孙成智,陈关龙,林忠钦,等.各项异性屈服准则对铝合金板成形预测精度的影响[J].塑性工程学报,2004,11(3):59-63.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
