锻压技术

板厚对三维曲面柔性卷板成形过程影响的数值模拟研究

英文标题：Numerical simulation on impact of 3D surface flexible roll forming process by sheet's thickness

作者：邓玉山李明哲龚学鹏胡志清

分类号：TG386

出版年,卷(期):页码：2010,35(4):36-39

摘要：

三维曲面柔性卷板成形技术是一种新颖的板材柔性成形技术。简单介绍了三维曲面柔性卷板成形技术，并以马鞍形件为例，采用通用的有限元程序建立了三维曲面柔性卷板成形过程的有限元模型。通过数值模拟的方法来研究同种材料、不同厚度的板材对其成形过程的影响，得出了在相同压下量时，随着板厚的增加，马鞍形件的成形效果越好的结论，并通过了实验验证。模拟结果对制定成形工艺，以及如何确定在一定参数下压制多少厚度的板材效果为最佳，具有一定的指导意义。

3D surface flexible roll forming technology is a novel sheet metal's flexible forming technology. 3D surface flexible roll forming technology was introduced briefly. Saddle part was taken for example, its finite element model was founded by general finite element program, the impact of its forming process by sheet with the same material and different thickness was researched through the method of numerical simulation, the result was gained that under the same giving quantity, the thicker of the sheet, the better of the forming effect. Experiment validated the result. The simulation result has a certain instruction function for deciding the forming process and obtaining the best result under some parameters to pressing the plate of certain thickness.

基金项目：

国家自然科学基金资助项目（50575090）

参考文献：

［1］郑东强，阎祥安，王国栋，等.三辊数控卷板成形过程有限元模拟系统研究[J].设计与研究，2005,（8）:23-29.
［2］茅云生，向胜，邵天芬．板材滚弯成形理论及自动控制的研究进展[J].船海工程,2001,(6):28-31.
［3］李明哲，胡志清，蔡中义，等.自由曲面工件多点连续成形方法[J].机械工程学报,2007，43（12）：155-159.
［4］龚学鹏，李明哲，胡志清.三维曲面柔性卷板成形技术及其数值模拟[J].北京科技大学学报，2008，30（11）：1296-1230.
［5］胡志清，李明哲，龚学鹏. 三维板类件的连续柔性成形技术研究[J].塑性工程学报,2008，15（1）：51-54.
［6］Hardt D E.Sheet metal forming with discrete die surfaces[A]. Proc. 9th NAMRC[C]. Portland, 1981.
［7］李明哲，中村敬一．基本的な成形原理の检讨(板材多点成形法の研究第一报)[A].平成4年度塑性加工春季讲演会论文集[C].横滨,1992.
［8］Tongru Huo,Nakamachi E.3-D Dynamic explicit finite element simulation of sheet forming[J].Advanced Technology of Plasticity, 1993,(3):1828-1833.
［9］Rockey K C, Evans H R, Griffiths D W,et al. The finite element method[M]. Cranada:Granada Publishing, 1983.
［10］Surana K S. Lumped mass matrices with non-zero inertia for general shell and axisymmetric shell element[J]. Int. J.Num. Meth.Eng., 1978,(12):163-165.

服务与反馈：

【文章下载】【加入收藏】