网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
汽车差速器壳类锻件精密挤压工艺研究
英文标题:Precision extrusion process study on automobile differential case forgings
作者:宫显宇 唐康 陈海鹏 王海旺 曹乃强 
单位:内蒙古一机集团富成锻造有限责任公司 
关键词:差速器壳 精密挤压 模块化生产 有限元分析 
分类号:TG376.2
出版年,卷(期):页码:2010,35(5):20-23
摘要:

差速器壳是汽车中的关键零件之一,形状复杂,采用传统开式模锻工艺生产,锻造成形和质量保证难度大。通过对3种差速器壳成形过程进行有限元分析,对工艺参数及模具结构进行优化设计,设计了3种差速器壳零件毛坯的精密热挤压模块化生产工艺方案。实际生产结果显示,锻件质量良好,与有限元分析结果吻合,工艺方案合理,可实现高质量、低成本的绿色生产。

Differential case is one of the most important parts in automobile, which is difficult to be produced using the traditional open forging die for its complicated shape. It is hard to guarantee the forging  quality. With FE analysis of three kind differential cases forming process, optimized design of parameter and die structure were carried out and the exactitude heat extrusion project was got . The result shows that the favorable quality is in accordance with the FE analysis data, the project is reasonable and the high quality and low cost production can be achieved.

基金项目:
内蒙古第一机械制造(集团)有限公司2009年先进制造技术科研项目(GY2010ZC023)
作者简介:
参考文献:


[1]张志文.锻造工艺学
[M].北京:机械工业出版社,1993.
[2]中国机械工程学会锻压学会.锻压手册:第1卷锻造
[M].北京:机械工业出版社,2008.
[3]马国华,郭学东.差速器锥齿轮冷模锻数值模拟及成形性能研究
[J].锻压技术,2008,33(4):133-135.
[4]张发廷.汽车后桥从动齿轮闭式模锻工艺研究
[J].锻压技术,2008,33(4):16-18.
[5]陈学慧.汽车贯通轴平锻工艺
[J].锻压技术,2009,34(5):9-11.
[6]毕大森.温冷挤压成形技术发展研究
[A].北京市锻压专业委员会.第三届华北塑性加工学术会议
[C].北京,2004.
[7]李天佑.冲模图册
[M].北京:机械工业出社,1996.
[8]李月恩,赵军,王维.热作模具表面失效与模具寿命关系研究
[J].锻压技术,2009,34(2):91-93.

 

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9