锻压技术

不锈钢波纹板冷弯成形有限元模拟研究

英文标题：FEM simulation of cold bending formation laws of stainless steel corrugated plate

作者：张祎邹仲平刘化民

关键词：冷弯成形波纹板数值模拟 Marc

分类号：TG386.3+1

出版年,卷(期):页码：2011,36(1):147-152

摘要：

利用有限元模拟软件MSC.Marc，模拟研究了不锈钢波纹板冷弯成形过程，建立了冷弯成形有限元模型。对板材咬入过程进行分析，并通过上辊下压方法实现了板材的咬入；对工件典型节点的应力应变变化规律进行模拟，获得了典型节点的应力变化历程曲线和横向、纵向应变分布曲线。模拟结果表明：板料在两架次之间存在变形过渡区，过渡区内板材不但发生弹性回复，而且仍然产生塑性变形。靠近轧辊部位应力达到最大值，这也是板料在轧辊附近容易出现缺陷的主要原因。

Using finite element software MSC.Marc, the stainless steel corrugated plate cold bending forming process was simulated and the cold bending forming finite element model was established. The biting process was analyzed and the biting was realized through the method of the upper roll pressing. The variation of stress and strain of typical nodes was simulated. The stress-history curve and the transversal and longitudinal strain distribution curve of typical nodes were obtained. The results show that the deformation transition zone exists between the two frames, and in where the plate has both elastic recovery and plastic deformation. Near the position of roll, the stress reaches the maximum, which is the main reason of the appearing defects.

基金项目：

国家自然科学基金资助项目（50775098）

参考文献：

［1］崔高健，吕相艳.冷弯型钢成形技术的发展现状[J].机械制造，2005，43（10）：41-44.
［2］张利鹏，周宏宇.冷弯型钢特点及其生产发展[J].锻压装备与制造技术，2005， (2)：26-28.
［3］吴振强.冷弯成形有限元分析及实验研究[D].昆明：昆明理工大学，2004.
［4］刘化民.不锈钢波纹顶板冷弯成形过程模拟研究[J].锻压装备与制造技术，2008，43（2）：70-72.
［5］李妍.不锈钢波纹板冷弯成形规律研究[D].长春：吉林大学，2006.
［6］ Ona H.Roll adjustment and computer aided design in cold roll forming[D].Tokyo :Taku-shoku University, 2003.
［7］ Liu Jiying, Shi Yongling,Ai Zhengqing. The FEA simulation the roll forming of AHSS tube ITA[A].Advanced Materials and Processing for Innovative Tube & Pipe Making & Forming[C]. Nagoya : Nagoya University ,2007.
［8］沈晓辉.实用冷弯型钢辊型设计专家系统的研究与开发[D].北京，北京科技大学,2002.
［9］ Sweeney K, Grunewald U. The application of roll forming for automotive structural parts[J].J. Mater. Process Tech., 2003, 132: 9-15.
［10］ Dyke R J, Mander S J, Bhattacharyya D. Roll forming continuous fiber-reinforced thermoplastic sheets: Experimental analysis[A]. The Second Australasian Conference on Materials[C]. Seoul, 2000.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】