锻压技术

胀断连杆锻造工艺开发研究

英文标题：Development and research on forging process of fractured connecting rod

作者：缪桃生薛燕菁蒋鹏2

关键词：胀断连杆锻造工艺锻件质量

分类号：TG316

出版年,卷(期):页码：2011,36(3):8-14

摘要：

胀断连杆对锻件强度和塑性要求较高。针对胀断连杆的特点，提出了合理的锻造方案。采用双模膛错开布置，预锻1、预锻2和终锻3个工步进行成形，并对各工序进行合理匹配。为了避免切边变形，增加了厚度和斜度补偿。通过试验，确定了加热、冷却及热处理工艺。最后，讨论了锻造过程中出现的问题并提出了相应的解决措施。

The intensity and plasticity requirement of fractured connecting rod is high. A reasonable forging proposal was put forward based on the property of connecting rod. Two stagger cavities were laid as well as each step was matched. The part was formed in three steps: pre-forgingⅠ, pre-forgingⅡ and finished-forging. Thickness and gradient were compensated for sake of avoiding distortion after cutting. Process of heating, cooling and heat treatment were obtained by test. Finally, the problems and countermeasures were discussed.

基金项目：

参考文献：

［1］赵新海，程联军，吴向红，等.国内连杆模锻加工技术的现状及发展[J].锻压装备与制造技术，2000，(1)：15-17.
［2］罗晴岚. 连杆锻造工艺技术的进步[J].锻压机械，2000,(4)：1-3.
［3］韩凤麟. 汽车发动机连杆发展趋向[J]. 现代零部件, 2006,(6)：48-54.
［4］蒋鹏，陆玛玲. 摩托车连杆锻造生产线的工艺设计[J]. 锻压技术, 1998,23 (3)：6-8.
［5］缪桃生，蒋鹏.非调质钢在汽车曲轴、连杆锻件上的应用研究[J].锻压技术,2010,35(6)：1-5.

服务与反馈：

【文章下载】【加入收藏】