网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
冲压机风险评价研究
英文标题:Study of risk assessment for press
作者:隰潇 胡志勇 
单位:内蒙古工业大学 
关键词:压力机 风险识别 安全评价 
分类号:TG315
出版年,卷(期):页码:2011,36(3):91-95
摘要:

在设计阶段及时发现机械存在不安全隐患,并进行设计更改,是保证机械安全非常有效和经济的一种方法。对机械实施风险评价的目的是识别风险、评估和评定风险,以便最终减小风险。通过对冲压机可能产生的危险、危险状态、危险事件以及可能造成的伤害,根据严重程度、暴露度、事件发生的概率和避免的可能性,采用风险图法计算风险指数。对风险指数高的危险采取风险减小措施,再对风险减小措施采取之后的风险进行评价,最终达到冲压机的本质安全。

Unsafe hidden danger of machine is found in time in the design phase and the design changes are carried on which is an effective and economic way to guarantee machinery safety. The purpose of implementing the risk evaluation of mechanical is to identify the risk, assessment and evaluation so as to eventually reduce the risk. Through analying the possible danger, danger state, dangerous events and damage occurred in press, according to the severity, exposure degrees, probability of occurrence of hazardous events and possibility of avoidance , the risk index was calculated using risk graph method. When the risk index was high,the risk reduction was adopted, and the risk would be evaluated after the reduction,then the essential safety of the press eventually was reached.

基金项目:
作者简介:
参考文献:


[1]GB/T15706.1-2007机械安全 基本概念与设计通则 第1部分:基本术语和方法[S].
[2]GB/T15706.2-2007机械安全 基本概念与设计通则 第2部分:技术原则[S].
[3]GB/T16856.1-2008机械安全 风险评价 第1部分:原则[S].
[4]GB/T16856.2-2008机械安全 风险评价 第2部分:实施指南和方法举例[S].
[5]GB/T8176-1997冲压车间安全生产通则[S].
[6]GB/T19670-2005机械安全 防止意外启动[S].
[7]Joseph-Jean Paques.The comprehension of the new risk assessment series standard and the principle,method and application of the risk assessment[J].Machinery Industry Standardization and Quality ,2007,(10):90-105.
[8]ANSI B11 TR3:2000风险评价和风险减小与机床相关的风险的评估、评定和减小指南[S].

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9