网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
基于实例的典型汽车覆盖件模具设计
英文标题:Case-based die design of typical automobile body panel
作者:郑晖 孟祥韬 张嘉 韩颖杰 涂春虎 赵文雪 
单位:沈阳航空航天大学 东北大学 沈阳飞机工业集团有限公司 
关键词:冲压工艺性 计算机辅助设计 汽车覆盖件 三维建模 
分类号:TG385.4
出版年,卷(期):页码:2011,36(3):98-103
摘要:

在分析了汽车发动机舱盖结构和工艺特点的基础上,确定了零件的冲压工序过程图,并对拉深、修边和翻边工艺性进行了阐述。同时,介绍了汽车覆盖件模具结构设计特点,并以CATIA为计算机辅助设计工具,设计出发动机舱盖拉深、修边及翻边成形所需的模具零件并对模具零部件进行装配,得到模具的装配体的三维数模。指出设计汽车覆盖件模具需要注意的要点:拉深模的设计重点是导滑板与调压垫和墩死垫的布置;修边模的设计重点是凹模的分块与废料刀的布置;翻边模的设计重点是翻边顶出器的布置。
 

The stamping technological process of the automobile engine cover was determined based on the analysis on its structure and technological characteristic. And the trimming and flanging technology was stated especially. At the same time, the design points of the die structure for the automobile body panel were stated. The components of the stamping,trimming and flanging die was designed using CATIA. They were assembled and the three-dimensional modeling of die was generated. The key points of the automobile body panel die were indicated. For the drawing die, the design emphasis is the layout of the guide plates and the pressure regulating pad and the backing pad. For the trimming die, the design emphasis is the design of the die inserts and the layout of the scrap cutters. For the flanging die, the design emphasis is the layout of the ejector parts.

基金项目:
辽宁省教育厅项目(L2010428)
作者简介:
参考文献:


[1]郑金桥,黄勇,王义林. 汽车覆盖件冲压工艺设计现状及发展趋势[J].塑性工程学报,2003,10(6):9-13.
[2]郑晖,于利凯. 汽车前底板冲压工艺分析与拉深模设计[J]. 锻压技术,2009,34(3):103-105.
[3]郭春生,汤宝俊,孙继明. 汽车大型覆盖件模具[M].北京:国防工业出版社,1993.
[4]崔令江. 汽车覆盖件冲压成形技术[M]. 北京:机械工业出版社,2003.
[5]现代模具技术编委会. 现代模具技术——汽车覆盖件模具设计与制造[M].北京:国防工业出版社, 1998 .
[6]胡江波,柳玉起,章志兵.车身覆盖件模具的拉深筋工艺设计和优化[J].锻压技术,2008,33(1):69-72.
[7]杨晓红,张邦成. 汽车覆盖件拉深模具结构设计模板化CAD 系统[J].农业机械学报,2007,38(11):149-152.
[8]章志兵, 王同俊, 柳玉起, 等. 汽车覆盖件修边与翻边工序的快速仿真系统[J].锻压技术,2008,33(4)140-144.
[9]张懃. 翻边凹模镶块交接型式的分析[J]. 模具技术,2006,(5):38-41.
[10]田嘉生, 马正颜. 冲模设计基础[M].北京:航空工业出版社,1994.

 

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9