锻压技术

Cr12合金高温压缩变形行为及热加工图

英文标题：High temperature deformation behavior and processing map of Cr12

作者：石静房鑫杨运民袁国栋王艳蕾

关键词：Cr12合金热变形流动应力热加工图

分类号：TG144

出版年,卷(期):页码：2011,36(3):127-130

摘要：

在TMTS热模拟试验机上对中压转子材料Cr12合金钢进行了实验，研究了Cr12合金钢在温度900～1150℃，变形速度为0.001～10s-1的变形条件下的热变形行为。结果表明，该合金为热敏感型和应变速率敏感型材料。Cr12合金的热加工图表明，该材料存在两个流变失稳区，在实际生产过程中，变形温度在1000℃以上时，应变速率应控制在5s-1以下，变形温度在900～1000℃之间时，应变速率应控制在0.03s-1以下为宜。

TMTS thermal simulation testing machine was used to conduct the experiment of Cr12. Thermal deformation behavior of Cr12 was studied in the temperature of 9001150 ℃ and deformation rate of 0.00110s-1. The results show that the alloy is sensitive to heat and strain rate. And the analysis of process map indicates that Cr12 has two theological unsteady areas. During hot working process when deformation temperature is above 1000℃, strain rate should be controlled under 5s-1; when deformation temperature is between 9001000 ℃, the strain rate should be controlled under 0.03 s-1.

基金项目：

参考文献：

［1］Spigarelli S. Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy[J]. Materials Science and Engineering, 2007,462(4): 197.
［2］Srinivasan N. Hot deformation behaviour of Mg-3Al alloy-A study using processing map[J]. Materials Science and Engineering A,2008, 476(4): 146 .
［3］曾卫东,周义刚,周军，等.加工图理论研究进展[J].稀有金属材料与工程，2006,35(5): 673.
［4］李淼泉,王小津,苏少博，等. GH4169 合金塑性变形行为及加工图[J]. 中国机械工程，2008，（15）: 021.
［5］范永革，汪凌云.AZ31镁合金的中温流变失稳特征[J].中国有色金属学报,2005, 15(10): 1602.
［6］Murty, Narayana S V S, Rao,et al. On the development of instability criteria during hot working with reference to IN 718[J]. Materials Science and Engineering A,1998,254(1/2):76-82.

服务与反馈：

【文章下载】【加入收藏】