锻压技术

在线辊式冲孔模具的设计与模拟研究

英文标题：Mould design and simulation of online roller punching

作者：杜雁冰韩静涛张永军刘靖

单位：北京科技大学

分类号：TG76

出版年,卷(期):页码：2011,36(4):106-110

摘要：

在线辊式冲孔是一种应冷弯生产线高速冲孔要求而发展起来的新工艺。所开发的新型辊冲设备采用钢质凸模配对聚氨酯凹模的新型模具结构，能够完成厚度小于1mm低碳钢薄带的高速连续冲孔。在模具开发过程中，采用Deform 3D有限元软件对聚氨酯冲孔工艺过程进行了全面的数值模拟，并对冲头设计方案进行了优化分析。经计算机仿真分析和试验验证，内斜刃冲头在冲孔孔形和冲裁力方面均表现出良好的工艺性。

Online roller punching is a new process for the need of high speed punching in the cold roll forming line. A new type of roller punching set in which the new mould structure of steel punching pairing polyurethane die was developed, and high speed continuous punching of low carbon steel strip with the thickness less than 1 mm could be finished. During the development of the moulds, Deform 3D FEM software was used to simulate the polyurethane punching process in detail, and the optimization design of punch was analyzed. With the analysis of the simulation and test results, the inner oblique edge punch has a very excellent punching process of the hole shape and punching load.

基金项目：

参考文献：

[1] 王元生.用“滚冲”方式加工孔工艺探析[J].机械研究与应用，1999，12（2）：41-42.

[2] 付建华.辊式精冲机初步探讨[J].山西机械，2002,（2）：9-10.

[3] 赵英彪, 付建华，雷步芳，等.板料辊式冲孔机结构分析与优化[J].锻压装备与制造技术，2007，（1）：24-26.

[4] 康凤，周杰，权国政，等.厚板冲裁过程的模拟仿真及其参数优化[J]. 锻压装备与制造技术，2005，（1）：66-68.

[5] 方刚，曾攀.金属板料冲裁过程的有限元模拟[J].金属学报,2001,37(6):653-655.

[6] 谢晓龙，赵震，虞松，等. 基于Oyane 损伤和断裂模型的厚板精冲过程数值模拟和缺陷预测[J]. 上海交通大学学报，2006，40(6):927-931.

[7] Goijaert S A M , Govaert L E ,Baaijens F P T. Prediction of ductile fracture in metal blanking[J]. Journal of Manufacturing Science and Engineering,2000，122:476-483.

[8] Oyane M, Sato T, Okimoto K, et al. Criteria for ductile fracture and their application [J] . Journal of Mechanical Working Technology , 1980, 4:65-81.

[9] Lee T C, Chen L C, Zheng P F. Application of the finite element deformation method in the fine blanking process[J]. Journal of Materials Producing Technology ,1997,63 (123):744.

[10] Hambli R, Reszka M. Fracture criteria identification using an inverse technique method and blanking experiment [J]. International Journal of Mechanical Sciense, 2002, 44:1349-1361.

服务与反馈：

【文章下载】【加入收藏】