Shackle is a product of the link fittings in overhead power transmission line. The requirement for its mechanical strength is high. They are of different specifications and there is a high demand. Commonly, The  cross wedge rolling die will be seriously worn after a period of time. In order to extend the die service life, the traditional die structure was improved. Two sets of dies with two working surfaces of inserted type made of H13 hot die steel for cross wedge rolling were designed and the cross wedge rolling process parameters were reasonably determined. The shackles of five sizes could be rolled. The rolling die structural characteristics and making  points were introduced. The die had been used in the practical production, the rolled shackles met the quality requirements. The working condition was greatly improved. The production efficiency and economic benefit can be improved respectively. In considering the die structure and cost, it can be used as a reference for designing the die of the similar product.