锻压技术

精密冲裁压边圈上接触压应力变化规律研究

英文标题：Study on contact compress stress variation rule on fineblanking blank holder

作者：丁日显王连学陈维朱其超郭成

分类号：TG386.2

出版年,卷(期):页码：2011,36(5):38-42

摘要：

以PVDF压电薄膜为感应单元，研发出测量精冲压边圈和板料接触压应力的薄膜传感器，避免了以往两个研究的不足：由液压压力推算压边力，中间传递环节会使精度降低；以压边力进行研究，忽略了接触面积不同导致的接触压应力的差异。采用所研发的薄膜传感器测试了0.65 mm厚H62板料精冲过程。测试结果发现：接触压应力存在都是在峰值之后以指数形式衰减的两次波动；V形齿压入板料增大了金属流动阻力导致冲裁时接触压应力增加。

A new film sensor using PVDF film as sensing element was developed to measure the contact stress, which overcame two weaknesses as follows:when calculating blank holder force by hydraulic pressure,the accuracy of transmission link was reduced; when researching the blank holder force,the difference of contact stresses caused by different contact areas were ignored. The fineblanking process of H62 sheet with thickness of 0.65 mm was testet by the developed stress sensor. The results show that the existing of contact stress is performed in the two waves with exponential decay after the peak, the contact stress rises as the result of the increase in metal flow resistance caused by the V\|shaped tooth being pressed into sheet.

基金项目：

参考文献：

[1]Schmidt R A, Birzer F, Hfel P, et al. 冷成形与精冲：冷成形工艺、材料性能、零件设计手册[M]. 赵震，译. 北京: 机械工业出版社,2008.

[2]Sutasn Thipprakmas, Masahiko Jin, Masao Murakawa. Study on flanged shapes in fineblanked-hole flanging process (FB-hole flanging process) using finite element method (FEM) [J]. Journal of Materials Processing Technology, 2007, 192193: 128-133.

[3]Sutasn Thipprakmas, Masahiko Jin, Masao Murakawa. An investigation of material flow analysis in fineblanking process[J]. Journal of Materials Processing Technology, 2007, 192193: 237-242.

[4]Ridha Hambli. Finite element simulation of fine blanking processes using a stress-dependent damage model[J]. Journal of Materials Processing Technology, 2001, 116(23):252-264.

[5]Kwak T S, Kim Y J, Seo M K, et al. The effect of V-ring indenter on the sheared surface in the fine-blanking process of pawl[J]. Journal of Materials Processing Technology, 2003,143144: 656-661.

[6]Sutasn Thipprakmas. Finite element analysis of V-ring indenter mechanism in fine-blanking process[J]. Materials and Design, 2009, 30(3): 526-531.

[7]Sutasn Thipprakmas, Masahiko Jin, Kanaizuka Tomokazu, et al. Prediction of fineblanked surface characteristics using the finite element method (FEM) [J]. Journal of Materials Processing Technology, 2008, 198(13): 391-398.

[8]Gram M D. Fineblanking of high strength steels: Control of material properties for tool life [J].Journal of Materials Processing Technology, 2011, 211(4): 717-728.

[9]郭伟国, 褚世永. 不同力和温度对PVDF压电薄膜压电系数的影响[J].科学技术与工程, 2008, 8(2): 347-351.

[10]李焰, 张向荣, 谭红梅, 等. 国产 PVDF压电薄膜的冲击加载及卸载响应研究[J]. 高压物理学报, 2004, 18(3): 261-266.

[11]李焰, 钟方平, 刘乾,等. PVDF在动态应变测量中的应用[J]. 爆炸与冲击, 2003, 23(3): 230-234.

[12]程啟华. PVDF压电传感器温度特性研究[J].南京工程学院学报：自然科学版 , 2009, 7(3): 68-71.

[13]Charest J A, Lynch C S. The response of PVF2 stress gauges to shock wave loading[A].Schmidt S C, Davison L W. Shock Compression of Condensed Matter[C]. New York: Elsevier Science Publishers B V , 1990.

[14]郭伟国, 褚世永. 不同力和温度对 PVDF压电薄膜压电系数的影响[J]. 科学技术与工程, 2008, 8(2): 347-352.

[15]席道瑛, 郑永来. PVDF压电计在动态应力测量中的应用[J]. 爆炸与冲击, 1995, 15(2): 174-179.

[16]曾辉, 余尚江, 杨吉祥, 等. PVDF压力传感器的动态灵敏度校准[J]. 传感器技术, 2003, 22(10): 39-41.

[17]David G Kleinbaum, Lawrence L kupper, Keith E Muller, et al. Applied Regression Analysis and Other Multivariable Methods[M].United States of America: Thomson Learning, 2003.

服务与反馈：

【文章下载】【加入收藏】