锻压技术

镁合金薄板连续铸轧技术研究

英文标题：Technology research on magnesium alloy sheets in horizontal continuous casting process

作者：邢预恩张根保要二仓

关键词：镁合金超薄超宽薄板水平连铸热轧

分类号：TG146.2+2; TG115.21+3; TG335.5+5

出版年,卷(期):页码：2012,37(2):29-31

摘要：

优质超薄的镁合金宽幅薄板市场需求巨大，但镁合金的室温塑性加工能力较差，水平连铸生产的镁合金薄板存在缺陷。本文通过对AZ31镁合金薄板连续铸轧技术研究，得出水平连铸后二次冷却是非常有效的控制晶粒尺寸的方法，改善了连铸镁板质量。轧前经预热处理和多道次轧制，可以使晶粒形成动态再结晶，使晶粒细化，是取得良好薄板的先决条件。经过连续铸轧可以得到优质超薄超宽的镁合金薄板带材。

Ultra thin, ultra wide and high quality magnesium alloy sheets have a great market demand. However, magnesium alloy posseses poor plastic formability at room temperature, magnesium alloy sheets of horizontal continuous casting exist defects. Based on the AZ31 magnesium alloy continuous casting and rolling technology research, the result that the secondary cooling is a very effective method for controlling grain size is obtained,which improves the quality of magnesium alloy sheets. Prehat treatment before rolling and multiple rolling can make the grain dynamic recry stallized and refined, which are the prerequisite conditions for the production of high quality alloy thin sheet. By continuous casting and rolling, the ultrathin, ultra wide, high quality magnesium alloy thin sheet can be produced.

基金项目：

参考文献：

［1］陈绪宏，丁培道，杨春楣.双辊快速凝固AZ31镁合金薄带试验研究[J].轻合金加工技术，2003，（5）：19-22.
［2］谢贤清，刘金水，虞觉奇.双辊快速凝固技术及其工艺探讨[J].四川冶金，1999，（1）：30-33.
［3］李永林，李铮，邸洪双，等.AZ31 镁合金薄带直接铸轧新工艺[J].轻合金加工技术，2004，（7）：15-17.
［4］Fatemi varzaneh S M, Zarei hanzaki A, Beladi H. Dynamic recrystallization in AZ31 magnesium alloy[J].Materials Science and Engineering A, 2007, 456 (1/2) :52-57 .
［5］Yasumasa Chino, Jaeseol Lee, Kensuke Sassa, et al. Press formability of a rolled AZ31 Mg alloy sheet with controlled texture[J].Materials Letters, 2006, (60):173-176 .
［6］Chino Y, Kimura K, Mabuchi M. Deformation charac teristics at room temperature under biaxial tensile stress in textured AZ31Mg alloy sheets[J].Acta Materialia,2009, （57）:1476-1485.
［7］Mori K, Tsuji H. Cold deep drawing of commercial magne sium alloy sheets[J].Annals of the CIRP, 2007, 56 (1) :285-288.
［8］Spigarelli S, Mehtedi M E, Cabibbo M, et al. Analysisof high temperature deformation and microstructure ofan AZ31 Magnesium alloy[J].Mater.Sci.Eng.A, 2007, 462 (1/2) :197-201.
［9］Jager A, Luka C P, Gartnerova V, et al. Influence ofannealing on the microstructure of commercial Mg alloy AZ31 after mechanical forming[J].Materials Science and Engineering A,2006, （432）:20-25.
［10］刘满平，马春江，王渠东,等.工业态AZ31镁合金的超塑性变形行为[J].中国有色金属学报，2002，12(4):797-900.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】