锻压技术

CAE分析在产品设计阶段的应用

英文标题：Application of CAE in the stage of production design

作者：郑宇锋苏传义谢文才邰伟彬

单位：一汽轿车股份有限公司

分类号：TG386.41

出版年,卷(期):页码：2012,37(2):51-54

摘要：

以Autoform为CAE分析平台，针对某车型车门外板手扣下部的开裂问题进行了模拟分析，得到了满足设计要求、工艺要求的产品优化参数；把CAE分析结果与试制产品及量产产品的状态进行对比，发现分析结果和产品实际状态吻合较好。实验表明，在产品设计阶段引入CAE分析，可以有效减少产品的设计缺陷及提高产品的工艺可行性，达到提高工作效率、缩短产品开发周期的目的。

Using Autoform software as analysis platform, the cracking problem of the door outer handle area was simulated，the optimal parameters suited for the design needs and met the requirements of stamping technology were obtained which were applied on the product designing. Then the results of CAE、Tryout and MP were contrasted,and the conclusion was very well. The results show that CAE analysis in the stage of design is useful to enhance the design quality of the products, improve the processing feasibility,which achieves the aims of higher work efficiency and shorter research cycle .

基金项目：

参考文献：

[1]柴山,焦学健,王树凤. CAE 技术在汽车产品设计制造中的应用[J]. 农业装备与车辆工程,2005，(1): 33-36.

[2]崔令江.汽车覆盖件冲压成形技术[M].北京:机械工业出版社,2003.

[3]夏晓峰,苏传义.汽车内饰加强板冲压工艺的制定及有限元模拟分析[J].锻压技术,2006，31(6):36-39.

[4]李硕本.冲压工艺学[M].北京:机械工业出版社,1982.

服务与反馈：

【文章下载】【加入收藏】