网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
深筒状拉深零件切边模具设计
英文标题:Trimming die design of deep tubular drawing part
作者:朱成俊 刘暘 
单位:河南工业职业技术学院 
关键词:拉深工艺 切边 模具设计 
分类号:TG385.4
出版年,卷(期):页码:2012,37(2):112-114
摘要:

根据深筒状拉深零件不适宜采用传统的机加工艺进行切边的工艺特点,设计出连续旋转式切边模具。利用螺杆螺母机构将压力机的直线运动转化为凹模的旋转偏心运动切去工件的不平整边缘,大幅提高了切边效率。调节定位柱的长度可控制圆筒形件的切边高度,同时便于刃磨。加工后的工件表面光整,高度一致。

A continuous rotary trimming die was designed for the reason that the traditional machining process is not suitable for cutting deep tubular drawing parts. Using screw nut mechanim, the linear motion of press machine could be turned into rotary eccentric motion in order to cut off uneven edge which greatly enhanced the productivity. Adjusting the length of locating rod could control the trimming height of tubular drawing part and be convenient for burring. The finished surface of part is smooth and has highly consistent length.

基金项目:
作者简介:
参考文献:


[1]吴玉学. 杯状压铸件的切边模设计[J].模具制造,2005,(4):27-28.
[2]甄瑞麟. 筒形件多功能水平切边模[J].模具工业,2006,32(8):40-41.
[3]张福乐. 矩形拉伸件切边模设计[J].模具制造,2008,(11):29-32.
[4]周大隽. 冲模结构设计要求与范例[M].北京:机械工业出版社,2005.

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9