锻压技术

挤压筒多区加热的接线研究

英文标题：Wire connection study on container multiple zone heating

作者：李卓伟柴婷婷

分类号：TG376

出版年,卷(期):页码：2012,37(2):129-133

摘要：

挤压筒加热是热挤压生产过程中的重要前提条件之一。熟练掌握不同分区接线对于设计人员和现场维护工人都非常重要。介绍了目前挤压筒加热的常用分区方式、相应的接线方式、加热功率和电流计算、电阻加热器结构、热电偶测温配置等。并且根据现场实际调试经验,提出了一些实用的建议，为今后设计更合理的挤压筒加热分区方式、现场接线及处理电气故障、编程控制挤压筒温升和温差提供了一些参考。

The container heating is one of the important prerequisites of hot extrusion. Familiar with the different zones wiring connection is very important for the designer and fieldworker. The common application of multiple zones heating container, corresponding wire connection, calculating heating power and electric current, the structure of heating resistance, the thermocouple configuration and so on were introduced. According to the actual fieldwork experience, some useful and practical advices were mentioned, which provide reference for designing more reasonable heating zones of container, wiring and electrical failure treatment on fieldwork, and programming control of container temperature.

基金项目：

参考文献：

［1］黄鲲鹏.1250 t铜挤压机挤压筒感应预热电路结构改造[J].电工技术,2010,(2):51-53.
［2］杨文一,张亦工,魏敬忠.挤压筒加热及温度控制问题的探讨[J].锻压技术,2011,36(2):103-106.
［3］Beer S,毕宇虹.沿轴向布置得多区电阻加热的挤压筒[J].铝加工技术,1996,(4):24-25.
［4］Joseph C, Benedyk. The evolution of the smart container: Achieving isothermal control in extrusion [J]. Light Metal Age, 2008,(4):40-47.
［5］魏军. 金属挤压机[M].北京:化学工业出版社,2006.
［6］胡洪全,房崇顺,赵玉军.挤压筒损坏原因分析及其预防措施[J].轻合金加工技术,2002,30(7): 38-39.
［7］Stefon Beer. Use of induction systems for the production of extruded, higholloyed steel tubes[J]. Heat Processing, 2011, 2(9):147-150.
［8］Laue K,王正波.挤压的热平衡及温度变化[J].轻合金加工技术,1986,14(6):14-21.
［9］秦月明. 挤压筒分区加热控制系统的设计[J].锻压装备与制造技术,2008,43(1):29-31.
［10］Wolfgang Eckenbach. Marx heat up modern container design for exact temperature control and profile[A].2nd AustralasianPacific Aluminium Extrusion Conference[C].Australsian， 2003.

服务与反馈：

【文章下载】【加入收藏】