锻压技术

材料和目标形状对多点拉形成形精度的影响分析

英文标题：Effect of material and object shape on accuracy of multi-point stretch forming

作者：邓玉山刘纯国李明哲段磊姚绵利

分类号：TG386

出版年,卷(期):页码：2012,37(1):55-59

摘要：

多点拉形是将整体拉形模具离散成多点模具, 可以在一套多点拉形模具上实现不同形状零件的拉形，省去了模具的设计、制造等大量的生产成本，实现了蒙皮件的柔性成形。多点拉形主要适于成形小曲率、大变形的蒙皮件，材料和目标曲面形状都是影响多点拉形成形结果的重要因素。通过对3种材料成形不同曲率半径球形件的多点拉形过程进行数值分析，研究材料和成形件目标形状对多点拉形的影响。结果表明，在成形件中心区域的形状误差小于边缘区的形状误差，拉伸方向的形状误差大于垂直拉伸方向的误差，成形件的曲率半径越小，成形件的形状误差越大。

Multi-point stretch forming (MPSF) technology is that the traditional solid stretch die is replaced by discrete multi-point die, and the different shape parts can be formed by a multi-point stretch die. This technology saves the cost of die design and fabrication for products, and realizes the flexible fabrication. Multi-point stretch forming operation is a primary means to form a sheet metal of relatively small curvature with large deformation. Materials and the curvature of the target shape are important factors to affect results of multi-point stretch forming. By numerically analyzed the process of multi-point stretch forming with three materials and different curvature radiuses, the effects of material and object shape on the multi-point stretch forming were discussed. The results show that the shape errors are smaller in central regions than in marginal regions, and these are bigger in stretching direction than perpendicular to stretching direction. When the curvature radius of target shape is smaller, the shape error will be larger.

基金项目：

国家自然科学基金资助项目(50775098);吉林大学“985工程”资助项目

参考文献：

[1]《板金冲压工艺手册》编委会.板金冲压工艺手册[M].北京：国防工业出版社，1989.

[2]胡世光，陈鹤峥.板料冷冲压成型的工程解析[M].北京：北京航空航天大学出版社，2004.

[3]周朝晖，蔡中义，李明哲.多点模具的拉形工艺和数值模拟[J].吉林大学学报:工学版, 2005, 35(3)：287-291.

[4]张海明. 基于多点数字化模具板料拉形过程的数值模拟[D]. 吉林：吉林大学, 2006.

[5]王少辉，蔡中义，李明哲.铝合金型材多点拉弯成形的数值模拟[J].锻压技术, 2010,35(2)：66-69.

[6]Cai Z Y, Wang S H, Xu X D，et al. Numerical simulation for the multi-point stretch forming process of sheet metal[J]. Journal of Materials Processing Technology,2009, 209(1):396-407.

[7]Wang S H, Cai Z Y,Li M Z. Numerical investigation of the influence of punch element in multi-point stretch forming process[J]. International Journal of Advanced Manufacturing Technology,2010,49(58):475-483.

[8]Hardt D E, Grossard D C. A variable geometry die for sheet metal forming: design and control[A]. Joint Automatic Control Conference[C].USA,1980.

[9]Hardt D E, Olsen B A, Allison B T,et al., Sheet metal forming with discrete die surfaces[A]. Proc. 9th NAMRC[C]. USA,1981.

[10]Papazian J M. Tools of change: Reconfigurable forming dies raise the efficiency of small-lot production[J]. Mechanical Engineering, 2002, 124(2):52-55.

[11]Walczyk D F, Hosford J F , Papazian J. Using reconfigurable tooling and surface heating for incremental forming of composite aircraft parts[J]. Journal of Manufacturing Science and Engineering, 2003, 125(2): 333-343.

[12]Valjavec M, Hardt D E. Closed-loop shape control of the stretch forming process over a reconfigurable tool: Precision airframe skin fabrication[A]. Proceedings of the ASME[C].MED,1999.

服务与反馈：

【文章下载】【加入收藏】