锻压技术

卵形齿轮传动高速精密压力机运动学研究

英文标题：Kinematic research of high-speed precision press with oval gear transmission

作者：龙金星邓建春苗学刚

单位：华中科技大学

分类号：TG315.5

出版年,卷(期):页码：2012,37(3):80-84

摘要：

分析了一种新型卵形齿轮曲柄连杆机构高速压力机传动系统的运动过程，建立了运动学方程。根据在研发的高速压力机，利用ADAMS建立卵形齿轮曲柄连杆机构的动力学模型，仿真分析了滑块的位移、速度和加速度曲线，研究了卵形齿轮偏心率e以及曲柄半径R对滑块运动的影响。结果表明：与普通曲柄连杆机构运动曲线相比，卵形齿轮曲柄连杆机构具有在滑块下死点附近位移平稳、速度和加速度小的特点，这些特点有利于其在高速冲压过程中保持平稳、高精度。

The motion process of transmission system for the high-speed press with a new oval gear-crank and connecting rod mechanism was analyzed, and kinematic equations were established. According to the high-speed press being researched, the dynamic model of oval gear-crank and connecting rod mechanism was established by ADAMS. The slider displacement, velocity and acceleration curves were simulated and analyzed, and the influence of oval gear eccentricity e and crank radius R on the motion was researched. The results show that compared with motion curves of common crank and connecting rod mechanism, oval gear-crank and connecting rod mechanism has features as smooth displacement, low speed and acceleration near the bottom dead center(B.D.C) of the slider，which help to maintain stable and high precision in the process of high-speed stamping.

基金项目：

参考文献：

［1］郭成志,符炜,朱巨才,等．急回机构中非圆齿轮节曲线的设计[J].机械工程学报,2005,41(11):221-227.
［2］李纪强.非圆齿轮传动啮合特性分析及承载能力研究[D].北京：机械科学研究总院,2010.
［3］吕言,周建国,阮澍.最新伺服压力机的开发以及今后的动向[J].锻压装备与制造技术,2006,(1):11-14.
［4］师后龙,何光军,鹿新建,等.曲柄压力机的传动系统及发展趋势[J].锻压装备与制造技术,2010,(4):14-17.
［5］谢漱峰.椭园和卵形齿轮传动及其节曲线计算[J].安徽工学院学报,1984,(1):14-23.
［6］夏金兵,谢漱峰.卵形齿轮数控加工中节曲线任意弧长的计算[J].安徽工学院学报,1992,11(3):7-13.
［7］马仁选.印钞机采用卵形齿轮传动的设计[J].机械，2001,28(4):33-34.
［8］贾长治,殷军辉,薛文星,等.MD ADAMS虚拟样机从入门到精通[M].北京:机械工业出版社,2010.
［9］Shiping Yang,Baojun Zou,Quanmin Sun,et al. Solid modeling and motion characteristics analysis of oval gear pair based on the tooth profile conversion method[J]. Advanced Materials Research,2012,(429):14-18.
［10］何德誉.曲柄压力机[M].2版.北京：机械工业出版社,1995.
［11］鹿新建,柯尊芒,朱思洪,等.高速精密压力机下死点精度研究[J].锻压技术,2010,35(1):87-92.

服务与反馈：

【文章下载】【加入收藏】