锻压技术

基于Deform的叶片叶身预锻结构形式优化设计

英文标题：Optimal pre-forging shape design of blade body based on Deform software

作者：邵勇郭平义

单位：江苏科技大学

分类号：TG316.3

出版年,卷(期):页码：2012,37(5):12-16

摘要：

在叶片叶身预锻结构形式的设计过程中，利用Deform-2D有限元分析软件对不同预锻叶身形式、不同扭角位置处的叶身进行了终锻过程模拟。通过比较成形性、变形均匀性、成形前毛坯的热损失等关键因素，详细分析了不同预锻叶身结构对终锻件的成形及质量的影响，并在此基础上，对传统结构进行优化设计，最终获得了较理想的预锻叶身结构模型。

During pre-forging shape design of blade body, the final forging process including different pre-forging forms and transverse cross positions of different twist angles along blade body were simulated by using Deform-2D finite element analysis software. The final forging forming and quality effected by different pre-forging shapes of blade body were analyzed in details through comparing some key factors such as formability, deformation uniformity, loss of heat before deformation, etc. Then, based on traditional model, improved shape was designed and optimal pre-forging shape of blade body was obtained finally.

基金项目：

参考文献：

［1］Sedighi M, Tokmechi S. A new approach to preform design in forging process of complex parts[J]. J. Mater. Process. Technol., 2008, 197: 314-324.
［2］Park J J, Hwang H S. Preform design for precision forging of an asymmetric rib-web type component[J]. J. Mater. Process. Technol., 2007, 187188: 595-599.
［3］Murat Arbak, Erman Tekkaya A, Feridun Zhan. Comparison of various performs for hot forging of bearing rings[J]. J. Mater. Process. Technol., 2005, 169: 72-82.
［4］杨艳慧, 刘东, 贺子延，等. 基于响应面法（RSM）的锻造预成形多目标优化设计[J]. 稀有金属材料与工程, 2009, 38（6）：1019-1024.
［5］赵新海, 李剑峰, 黄晓慧，等. 控制锻件变形均匀性和变形力的锻造预成形多目标优化设计[J]. 机械工程学报, 2009, 45（5）：193-197.
［6］Zhao X H, Zhao G Q, Wang G C, et al. Sensitivity analysis based multiple objective preform die shape optimal design in metal forging[J]. J. Mater. Sci. Technol., 2006, 22（2）：273-278.
［7］王广春. 基于微观组织优化的锻造工艺预成形及毛坯形状优化设计[J]. 塑性工程学报, 2007, 14（2）：69-72.
［8］Guan J, Wang G C, Guo T, et al. The microstructure optimization of Hshape forgings based on preforming die design[J]. Materials Science and Engineering A, 2009, 499：304-308.
［9］王广春, 管婧, 李玲. 面向微观组织优化的锻造工艺预成形优化设计[J]. 锻压技术, 2007, 32（1）：10-12.
［10］邵勇, 郭平义. 挤杆成形工艺的改进[J]. 热加工工艺, 2009, 38（21）：114-116.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】