锻压技术

钛合金机头罩固体颗粒介质成形工艺研究

英文标题：Study on titanium alloy spinner based on solid granules medium forming

作者：李鹏亮张志曾元松

关键词：李鹏亮张志曾元松

分类号：TG386.3

出版年,卷(期):页码：2012,37(5):60-62

摘要：

固体颗粒介质板材成形是采用固体颗粒介质代替刚性凸模（或弹性体、液体）的作用对板材进行软模成形的工艺，由于固体颗粒介质具有很强的耐热性能，特别适用于钛合金薄壁零件的成形。针对TC1钛合金机头罩的零件特点，采用该工艺方法设计一套胀形模具，并通过胀形实验成功制造出符合设计要求的机头罩零件。结果表明，固体颗粒介质成形可解决复杂型面、薄壁、筒状钛合金零件难成形的问题，成形零件精度高，且表面质量好。

Solid granules medium sheet metal forming technology is a technology that applies solid granules medium instead of rigid punch (or leastomer, liquid) to finish the sheet metal flexible die forming. As solid granules medium has high resistance to effect of heat, it is suitable for manufacturing titanium alloy parts especially. According to the feature of TC1 titanium alloy spinner, the bulging mould was designed by using the forming method and the spinner part was manufactured successfully. The results prove that solid granules medium sheet metal forming can form titanium alloy parts with features of complex surface, thin\|wall and cylinder shape. The part has high precision and good surface.

基金项目：

参考文献：

［1］莱茵斯C，皮尔斯M. 钛与钛合金[M]. 陈振华，译.北京：化学工业出版社，2005.
［2］张喜燕，赵永庆，白晨光.钛合金及应用[M]. 北京：化学工业出版社，2005.

［3］赵长财.金属板料半模成形工艺[P].中国：200510007167.1.20050727.
［4］Rhoades M L, Rhoades L J. Method and Apparatus for Die Forming Sheet Materials[P]. United States Patent No.5085058，Feb.4，1992.
［5］Liu J,Westhoff B,Ahmetogla M,et al. Application of viscous pressure forming (VPF) to low volume stamping of difficulty-to-form alloys\|results of preliminary FEM simulations[J].Journal of Materials Processing Technology,1996,(53):49-58.
［6］董国疆.固体颗粒介质成形工艺理论及试验研究[D].秦皇岛：燕山大学，2007.
［7］赵长财，任学平，董国疆,等.管材固体颗粒介质成形工艺及其塑性理论研究[J].中国机械工程,2007,18(16):20002004.
［8］赵长财，肖宏，董国疆.管材屈曲和起皱分析[J].中国机械工程,2007,18(11):1363-1366.
［9］张新云，袁海环.固体颗粒介质拉深成形新工艺及成形模具设计[J].锻压技术,2010,35(1):93-95.
［10］HB/Z 1131986. 钛和钛合金的板材成形[S].
［11］理有亲.钛板冲压成形技术[M]. 北京：国防工业出版社，1986.

服务与反馈：

【文章下载】【加入收藏】