锻压技术

汽车发电机爪极温冷精密成形工艺研究

英文标题：Study on warm and cold precision forming process of automobile alternator claw poles

作者：滕来王飞郭成章立预

分类号：TG312；TG316

出版年,卷(期):页码：2012,37(5):166-171

摘要：

在分析爪极零件特点及成形难点的基础上，提出了温冷精密成形工艺。通过Deform-3D建立其有限元分析模型，对关键折弯工序进行分析。结果表明，a型切角、b型双向切角和c型矩形毛坯折弯工序共同经历折弯和反挤压两个阶段；a型切角毛坯成形时成形载荷适中，填充充分；通过成形实验最终得到齿形填充充分、无折叠的爪极锻件，验证了温冷精密成形的可行性。

Based on the analysis of the structural features and difficulties in forming for alternator claw poles, the warm and cold precision forming process was put forward. A finite element model was created for the critical bending process by the software Deform-3D. The results show that corner cutting, two direction corner cutting and rectangular billet experience the same two-stage process of bending and reverse extrusion during the blending process; the forming load of corner cutting billet is moderate and the tooth is well filled. At last, a well tooth filling forging without overlap defects was obtained by the forming experiment, which verifies the feasibility of warm and cold precision forming.

基金项目：

参考文献：

［1］张猛,催肖霞,胡亚民.国内外交流发电机的爪极生产工艺[J].锻压机械,2002,(3):1-3.
［2］王迎斌.爪极零件精密塑性成形新工艺研究[D].秦皇岛:燕山大学,2002.
［3］高永超.汽车发电机爪极精密模锻成形模拟和工艺设计[D].武汉:武汉理工大学,2003.
［4］原国森,辛选荣,刘汀，等.汽车发电机爪极精密成形新工艺[J].锻压技术,2009,34(2):10-12.
［5］周滨,辛选荣,刘汀.汽车电机爪极热锻正挤压工艺及模具设计[J].热加工工艺,2004,（12）:38-40.
［6］Chen H Q, Wang Q C,Guo H G. Research on the casting\|forging precision forming process of alternator poles[J]. Journal of Materials Processing Technology, 2002, 129(10): 330-332.
［7］Doege E, Bohnsack R. Closed die technologies for hot forging[J]. Journal of Materials Processing Technology, 2000, 98: 165-170.
［8］杨程,赵升吨,章建军.汽车发电机爪极闭式热锻一步成形工艺研究[J].锻压技术,2011,36（3）:14-18.
［9］杨程,赵升吨,徐凡. 汽车发电机爪极闭式一火两锻成形工艺研究[J].锻压技术,2011,36（5）:5-9.
［10］Lee M C, Chung S H, Jang S M. Three-dimensional simulation of forging using tetrahedral and hexahedral elements[J]. Finite Elements in Analysis and Design，2009，45:745-754.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】