锻压技术

半圆筋循环载荷作用下的板材变形特征研究

英文标题：Study of sheet deformation characteristics under the cyclic loading applied by semicircle drawbead

作者：李群李娜郭宝峰金淼

单位：燕山大学

分类号：TG386.1

出版年,卷(期):页码：2013,38(2):31-33

摘要：

针对板材在半圆筋中的变形具有弯曲、卸载及反向弯曲的循环加载特征，采用基于Mises屈服条件的各向同性硬化模型，对板材通过半圆筋的变形过程进行了有限元数值模拟分析，获得了板材节点通过半圆筋时沿流动方向的应力应变时间历程关系曲线。分析结果显示，板材通过半圆筋时经历了两次弯曲、卸载与反向弯曲的循环塑性变形的过程，循环加载共计经历4个加载分支。循环加载曲线在不同加载分支的应力应变关系可以近似为线性硬化，随循环加载次数增加，反映不同加载分支硬化情况的切线模量降低，并且在二次反弯曲阶段基本上不硬化。

As for the cyclic loading characteristics of bending, unloading and reverse bending in the process of sheet deformation in semi-circle draw bead, with the model of isotropic hardening rule based on Mises yield criterion, the process of sheet deformation when flowing along semi-circle draw bead was analyzed by finite element analysis and the history stress-strain curves of sheet nodes along the flowing direction were gained. The results show that sheet undergoes the plastic deformation processes of bending, unloading and reverse bending twice, and the cyclic loading has four loading branches in total. The relationship between stress and strain of cyclic loading curve in different branches can be approximately considered as a linear hardening. With the increase of the number of cyclic loading, the tangent modulus indicating the hardening in different loading branches decreases, and hardening would not happen in the process of the second reverse bending.

基金项目：

国家自然科学基金资助项目(50305031)；河北省自然科学基金资助项目（E2008000824）；河北省科技计划项目（12217621）。

参考文献：

［1］李群.板材在拉深筋中的循环变形特征及后续成形性能研究[D].秦皇岛：燕山大学，2011.
［2］Nine H D. The applicability of coulomb's friction law to drawbeads in sheet metal forming[J]. Journal of Applied Metal Working, 1982, 2(3):200-210.
［3］杨玉英,金朝海,王荣芳,等.拉深筋成形二维弹塑性有限元数值模拟[J]. 塑性工程学报, 2001, 8(1):31-34.
［4］李东升, 黄小明, 胡世光. 汽车覆盖件成形中拉延筋约束力的模拟计算[J]. 塑性工程学报, 1994, 1(3): 59-65.
［5］李淑慧, 林忠钦, 包友霞. 改进的等效拉延筋阻力模型及其应用[J]. 中国机械工程, 2002, 13(7): 558-561.
［6］史东才, 郭成,程羽.拉深筋约束力模型及试验研究[J]. 西安交通大学学报, 2006, 40(7): 819-822.
［7］李大永, 胡平, 李运兴. 拉伸筋阻力的一种简便解析模型[J]. 机械工程学报, 2000, 36(5):46-49.
［8］Meinders T, Carleer B D, Geijselaers H J M, et al. The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming[J]. Journal of materials Processing Technology, 1998, 83(13):234-244.
［9］徐丙坤, 施法中. 板料冲压成形数值模拟中等效拉延筋模型的建立与实现[J]. 锻压技术, 2000, 25(4): 24-27.
［10］臼田松男, 石井良男. 薄板成形における破断预测：第4報[R]. 第38回塑性加工连合講演会, 1987.
［11］Wang Hu, Li Enying, Li Guang Yao. Optimization of drawbead design in sheet metal forming based on intelligent sampling by using response surface methodology[J]. Journal of Materials Processing Technology,2008,206(13):45-55.
［12］Naceur H, Guo Y Q, Batoz J L, et a1. Optimization of drawbead restraining forces and drawbead design in sheet metal forming process[J]. International Journal of Mechanical Sciences, 2001, 43(10): 2407-2434.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】