锻压技术

小口径厚壁球形封头的冷拉深成形

英文标题：Cold drawing of smallbore thick walled spherical head

作者：蒋起臣王永生杨一平陈杰鹏汪非

分类号：TG376

出版年,卷(期):页码：2013,38(2):40-42

摘要：

冷拉深小口径厚壁球形封头成形是解决高压容器球形封头制造的高效生产技术。本文通过实验对小口径厚壁球形封头的结构尺寸、工艺参数、模具结构、脱模与热处理等方面进行了分析研究，实验结果表明,坯料外径、坯料厚度、削边厚度、模具形式的选择及脱模热处理都会影响成品质量。通过对主要工艺参数的优化、合理的模具设计及后续处理，避免了成形过程中出现的减薄破裂及“停等”的不良影响，最终获得了合格产品。

Cold drawing is highly effective for forming small-bore thick walled spherical head of high pressure container. The structural dimension, technical parameters, structure of die, as well as demoulding and heat treatment were analyzed. The experiment shows that outer diameter and thickness of blank, thickness of chamfered edge, die form, demoulding and heat treatment have effects on product quality. The detrimental effects such as thickness reduction, crack and “stop and wait” were avoided due to optimized main technical parameters, reasonable die design as well as post treatment. As a result, the qualified product was obtained.

基金项目：

参考文献：

［1］王仲仁. 塑性加工力学基础[M]. 北京：国防工业出版社，1989.
［2］李春峰，杨玉英，李硕本.半球形零件冲压变形失稳点分析[J].塑性工程学报, 1995,1(2):36-42.
［3］王学飞, 张健羽.小口径厚壁球形封头的压制[J]. 压力容器, 1990,7(3):66-69.
［4］张清玉，曲在文，刘颖, 等.稳压器下封头成形工艺的研究[J].锻压技术, 2002,27（4）:1-4.

服务与反馈：

【文章下载】【加入收藏】