锻压技术

汽车前防撞梁的热冲压成形数值模拟与试验

英文标题：Numerical simulation and experiment of hot stamping for front bumper of automobile

关键词：热成形前防撞梁数值模拟

分类号：TH16

出版年,卷(期):页码：2013,38(3):46-50

摘要：

采用LS-DYNA软件，对汽车前防撞梁的热成形工艺进行数值模拟分析，计算了在两种摩擦条件下热成形过程中零件的温度场、应力场、减薄率和FLD，预测了零件的成形性能。根据模拟结果开发了热成形模具，冲压出热成形前防撞梁零件，将数值模拟结果和试验结果进行对比，两者基本吻合，变化趋势相同。结果显示，摩擦状态对热成形工艺的成形性能影响较大。

LS-DYNA software was adopted to conduct numerical simulation analysis of hot stamping for front bumper. The temperature field distribution, stress field distribution, reduction rate distribution and FLD in the course of hot stamping under the two types of friction conditions were calculated，and the formability of parts was predicted. Based on the simulation，the hot stamping mould was developed，and the front bumper components of hot forming were stamped. Compared the test results with the simulation, both the results coincide basically with same variation trend. The results show that the friction state has a great impact on formability of hot stamping technology for parts.

基金项目：

国家科技支撑计划资助项目（2011BAG03B02）

参考文献：

［1］马鸣图，易红亮.高强度钢在汽车制造中的应用[J].热处理，2011，26(6):9-19.Ma M T,Yi H L.Application of high strength steel to manufacturing auto[J].Heat Treatment，2011，26(6):9-19.
［2］马鸣图，易红亮，路洪洲，等.论汽车轻量化[J].中国工程科学,2009,11(9):20-27.Ma M T,Yi H L ,Lu H Z,et al. On the lightweighting of automobile[J]. Engineering Sciences，2009,11(9):20-27.
［3］Karbasian H, Tekava A E. A review on hot stamping[J]. Journal of Materials Processing Technology, 2010,210:2103-2118.
［4］Kuriyama Y, Takahashi M, Ohashi H. Trend of car weight reduction using high strength steel[J]. Automotive Technology,2001,55(4):51-57.
［5］谷诤巍，姜超，单忠德,等.超高强度钢板冲压件热成形工艺[J].汽车工艺与材料,2009,(4):15-17.Gu Z W,Jiang C,Shan Z D,et al.Hot forming process for stamping parts of ultra high strength steels[J]. Automobile Technology & Material, 2009,(4):15-17.
［6］马宁，胡平，闫康康,等.高强度硼钢热成形技术研究及其应用[J].机械工程学报,2010,46(14):68-72.Ma N, Hu P, Yan K K, et al. Research on boron steel for hot forming and its application[J]. Journal of Mechanical Engineering，2010，46(14):68-72.
［7］徐伟力，艾健，罗爱辉,等.钢板热冲压新技术介绍[J].塑性工程学报, 2009,16(4):39-43.Xu W L,Ai J, Luo A H,et al. Introduction of sheet metal hot\|forming[J]. Journal of Plasticity Engineering, 2009,16(4):39-43.
［8］Lechler J，Merklein M.Hot stamping of ultra high strength steels as a key technology for lightweight construction[J]. Materials Science and Technology,2008,5(9):1698-1709.
［9］Turetta A,Bruschi S,Ghiotti A. Investigation of 22MnB5 formability in hot stamping operations[J]. Journal of Materials Processing Technology,2006,177:396-400.
［10］Arthur B Shapiro. Using Ls\|DYNA for hot stamping[A].7th European Ls\|DYNA Conference[C]. Salzburg，2009.
［11］Hoffmann H, So H, Steinbeiss H. Design of hot stamping tools with cooling system[J]. Annals of the CIRP,2007,56(1):269-272.

服务与反馈：

【文章下载】【加入收藏】