锻压技术

电动工具异形输出轴镦挤成形工艺研究

英文标题：Study on forming process of power tools profiled output shaft

作者：王卫平王雷刚谢斌鲁兴

关键词：异形输出轴变工作带正挤

分类号：TG376.3

出版年,卷(期):页码：2013,38(3):58-63

摘要：

针对电动工具异形输出轴结构的成形特点，提出变工作带正挤异形杆部和闭式镦粗头部台阶的两工步成形工艺方案，基于Deform\|3D有限元分析软件建立挤压、镦粗工艺过程的有限元模型，分析了成形过程的金属材料流动状况、成形载荷,模拟结果表明整个成形过程金属流动均匀、合理。基于模拟和计算结果，设计了模具并选取200 t液压机作为实验设备，获得表面完整、无折叠的合格制件。实验和模拟结果证明方案设计正确，可以投入生产。

Based on the analysis of the structure for power tools profiled output shaft, two-steps forming program of variable bearing lengths forward extrusion for profiled pole and closed upsetting for head steps was proposed. A 3-D coupled thermo-mechanical finite element model was created and analyzed by the software Deform-3D. The data of metal flows and forming load in the whole process were acquired. The simulation shows that metal flows uniformly and reasonably. Based on the simulation and calculation, the die was designed, 200 t hydraulic press was selected to be the experiment equipment and a well filling extruded part without overlap defects was obtained. The experiment and simulation demonstrate that the program is feasible.

基金项目：

国家自然科学基金资助项目（51275216）

参考文献：

［1］方伟，刘红娟.电动工具产品的概述及其发展趋势 [J].科技信息，2008, (3)：54-55.Fang W, Liu H J. Overview and development trend of power tool products [J]. Science and Technology Information, 2008, (3)：54-55.
［2］韩永康.基于有限元分析的输出轴的设计[J].机械制造与自动化，2006,(5):13-15.Han Y K. Design of exported axle based on finite element analysis[J]. Machine Building and Automation,2006,(5):13-15.
［3］洪慎章.冷挤压零件的工艺设计 [J].模具技术，2004,(3):43-46.Hong S Z. Process design of cold extrusion parts[J]. Die and Mould Technology, 2004,(3):43-46.
［4］丁晨，王军艺，刘俊亮.20CrMo汽车轴承断裂失效分析[J].材料热处理技术，2011,(14):197-200.Ding C, Wang Y J, Liu J L. Analysis on fracture failure of 20CrMo automotive bearing[J].Material and Heat Treatment,2011,(14):197-200.
［5］洪慎章.实用冷挤压模设计与制造[M].北京：机械工业出版社，2010.Hong S Z. Practical Cold\|extrusion Die Design and Manufacture[M]. Beijing: Machinery Industry Press,2010.
［6］王家安.低碳钢冷挤压中的磷化皂化研究 [D].济南：山东大学，2006.Wang J A. Research on Phosphorization\|Saponification of Soft Steel Cold Extrusion[D].Jinan:Shandong University,2006.
［7］梁波，崔红淼，张军.冷挤压过程的表面处理与润滑[J].模具制造技术，2008,(12)：71-73.Liang B, Cui H M, Zhang J. Surface treatment and lubrication in cold extruding process [J] .Die and Mould Manufacture,2008,(12)：71-73.
［8］杨程，赵升吨，徐凡.汽车发电机爪极闭式一火两锻成型工艺研究[J].锻压技术，2011,35(5):5-9.Yang Cheng, Zhao S D, Xu F. Study on forming process of two closed die forging steps in one time heating for alternator poles [J]. Forging and Stamping Technology,2011,35(5):5-9.
［9］金仁钢.实用冷挤压技术[M].哈尔滨：哈尔滨工业大学出版社，2005.Jin R G. Practical ColdExtrusion Technology [M]. Harbin: Harbin Industrial University Press,2005.
［10］熊建民，毛为民，余天庆.残余应力对疲劳裂纹扩展的影响[J].湖北工学院学报，1996,(4): 9-13.Xiong J M, Mao W M, Yu T Q. Effect of residual stress on fatigue crack propagation [J].Journal of Hubei University of Technology,1996,(4):9-13.
［11］林高用，陈兴科，杨立斌.铝型材挤压模工作带优化[J].中国有色金属学报，2006,(4):561-567.Lin G Y, Chen X K, Yang L B. Optimization of die bearing for aluminum profile extrusion die [J].The Chinese Journal of Nonferrous Metals, 2006,(4):561-567.
［12］胡国军，冯芳.现代冷挤压成型技术研究与应用[J].模具工业，2010,(2):64-67.Hu G J, Feng F. Research and application of modern cold extrusion technology [J]. Die and Mould Industry,2010,(2):64-67.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】