锻压技术

型材弯曲中断裂缺陷的探讨

英文标题：Discussion about fracture in profile bending process

作者：乔雅智李晓星郭涛胡浩周超

单位：北京航空航天大学

关键词：压弯有限元模拟型材厚度减薄

分类号：TG316.1+44

出版年,卷(期):页码：2013,38(3):75-79

摘要：

针对双室型材弯曲工艺，通过单向拉伸试验，获得材料的弹性模量等基本材料性能参数，基于有限元软件ABAQUS，通过简化模型、合理设置接触摩擦、体壳单元不同选择等，进行有限元仿真，获得成形后应力和厚度减薄量的分布，得出小半径成形应力应变偏大。通过设计试验，验证了有限元仿真的正确性，并对断裂件进行原因分析，得出进给量和材料性能为主要影响参数，并提出相应的改进措施。

According to the double chamber profile bending process，the modulus of elasticity and other basic parameters of the material were obtained with standard uniaxial tensile test. Based on the finite element software ABAQUS，the simulation was made by rational simplified model, reasonable friction，different element types(solid and shell), and the distributions of stress and thickness reduction after forming were got. The results show that the stress and strain of minor radius was larger. Some experiments were done to have a confirmation and to analyze the causes of failure. The main influencing parameters of amount of feed and material property were got and the corresponding measures were put forward.

基金项目：

参考文献：

［1］刘劲松，张士宏，王忠堂，等.整体壁板增量压弯试验与模拟[J].金属成形工艺，2003，(6)：23-25.Liu J S, Zhang S H, Wang Z T, et al. Experiment and simulation on the incremental bend forming technology of the integral wing\|skin panel[J]. Metal Forming Technology,2003,(6):23-25.
［2］刘春达，张旭，刘健，等.板材数控渐进成形过程数值分析与实验研究[J].锻压技术，2012，37(5): 35-38.Liu C D, Zhang X, Liu J, et al. Experimental and numerical research on incremental sheet forming[J]. Forging & Stamping Technology,2012,37(5):35-38.
［3］刘元君.异型截面环形件弯曲成形研究[D].哈尔滨：哈尔滨工业大学，2006.Liu Y J. Bending of Profiled Circular Workpieces[D]. Harbin: Harbin Institute of Technology,2006.
［4］李强，金新灿.动车组设计[M].北京：中国铁道出版社，2008.Li Q, Jin X C. The Design of Power Train Sets[M]. Beijing: China Railway Publishing House,2008.
［5］GB/T 2282002，金属材料室温拉伸试验方法[S].GB/T 228—2002，Metallic materials-Tensile testing at ambient temperature[S].
［6］刁可山.铝合金闭截面型材拉弯成形数值模拟及成形性研究[D].北京：北京航空航天大学，2005.Diao K S. Research on FE Simulation and Formability of Stretch\|wrap Bending Processes for Aluminum profile[D].Beijing: Beihang University,2005.
［7］许天宇，苏传义，高长乐，等.金属管型件成形过程数值模拟与质量分析[J].锻压技术，2012，37(2): 55-59.Xu T Y, Su C Y, Gao C L, et al. Numerical simulation and quality analysis of metal tube product's forming process[J].Forging & Stamping Technology, 2012, 37(2):55-59.
［8］肖寒.轻量化结构件弯曲成形工艺研究[D].大连：大连理工大学，2010.Xiao H. Research on Bending Processes of Lightweight Structures[D]. Dalian: Dalian University of Technology,2010.
［9］孟鹏飞，李晓星，金朝海，等.大型复杂截面型材拉弯成形数值模拟[J].航天制造技术，2010，（12）: 50-54.Meng P F, Li X X, Jin C H, et al. Numerical simulation on profile stretch\|bending with large complex cross section[J]. Aerospace Manufacturing Technology,2010,（12）:50-54.
［10］李思漪，夏琴香，盛湘飞，等.基于数值模拟的薄壁管冷弯成形工艺研究[J].锻压技术，2011，36(4): 163-167.Li S Y, Xia Q X, Sheng X F, et al. Study of forming process for thing\|walled tube rotary bending based on numerical simulation[J]. Forging & Stamping Technology,2011,36(4):163-167.

服务与反馈：

【文章下载】【加入收藏】