锻压技术

时变效应对轧辊轴承热弹流润滑的影响

英文标题：Influence of transient effect on thermal elastohydrodynamic lubrication of roll bearing

作者：任付娥王优强

单位：青岛理工大学

分类号：TH117.2

出版年,卷(期):页码：2013,38(3):133-137

摘要：

介绍了时变效应对于乳化液热弹流润滑轧辊轴承的影响，对比了稳态与时变条件下的热弹流润滑膜的压力与膜厚。建立了考虑时变效应的乳化液润滑轧辊轴承热弹流润滑数学模型，利用压力求解的多重网格法和弹性变形的多重网格积分法，得到了时变条件下乳化液热弹流润滑轧辊轴承的数值解。计算结果表明：时变效应对于热弹流乳化液润滑膜压力的影响很小，但对于膜厚的影响却很大，即时变效应时乳化液的润滑膜厚明显变薄。

The effect of transient on emulsion thermal elastohy drodynamic lubricated roll bearing was introduced. Thermal elastohydrodynamic lubrication film pressure and film thickness were compared in the thermal steady state and the thermal transient state. The mathematical model of thermal elastohy drodynamic elastohydrodynamic lubrication of roll bearing was established considering the transient effect. The distributions of lubricating film pressure and film thickness were obtained by numerical simulation using the multi-grid method for pressure, the multi-integration method for deformation and the column scanning method for temperature rise. The calculation results show that the influence of the transient effect on thermal elastohydrodynamic emulsion film pressure is very small. But it is serious for the influence of film thickness. The film thickness of transient effect is far less than the steady film thickness.

基金项目：

国家自然科学基金资助项目（50875137）；青岛经济技术开发区资助项目（2012-2-56）

参考文献：

［1］刘本海，王优强. 乳化液润滑复合塑料轴承的弹流润滑分析[J].润滑与密封，2009，（3）：36-40.Liu B H，Wang Y Q. The elastohydrodynamic lubrication analysis of emulsion lubricating composite plastic bearing[J]. Lubrication Engineering,2009,(3):36-40.
［2］刘本海，王优强. 乳化液润滑复合塑料轴承的线接触时变微观热弹流润滑分析[A].2009长沙摩擦学会议论文[C].长沙,2009.Liu B H,Wang Y Q. The micro\|elastohydrodynamic lubrication analysis of emulsion lubricating composite plastic bearing[A]. Lubrication Engineering, Changsha Tribology Conference Papers[C]. Changsha,2009.
［3］苏逢荃，罗文硕. 轧制力对静压支承油膜厚度的影响[J].青岛建筑工程学院学报，1993，（14）：42-46.Su P Q,Luo W S. The influence of rolling force to the static pressure support oil film thickness[J]. Qingdao Construction Engineering College Journals,1993,(14):42-46.
［4］杨沛然.流体润滑数值分析[M]. 北京：国防工业出版社,1998.Yang P R. Fluid Lubrication Numerical Analysis[M].Beijing: Defense Industry Press,1998.
［5］Yang P, Wen S. A generalized reynolds equation for non\|newtonian thermal elastohydrodynamic lubrication[J]. ASME Journal of Tribology,1990,112:631-636.
［6］Dowson D, Higginson G R. Elasto\|Hydrodynamic Lubrication[M]. Oxford:Pergamon Press,1977.
［7］Roelands C J A. Correlation Aspects of Viscosity-Temperature-Pressure Relationship of Lubricating Oils [D]. Netherlands: Delft University of Technology,1966.
［8］王家序，余江波，田凡，等. 水润滑塑料合金轴承数值分析的多重网格法[J]．润滑与密封，2005,30（4）:62-64.Wang J X,Yu J B,Tian F,et al.Multilevel method for the numerical analysis of water\|lubrication plastic alloy bearings[J].Lubrication Engineering,2005,30(4):62-64.
［9］郭峰，杨沛然，常秋英.等温线接触弹流润滑求解的多重网格技术[J].青岛建筑工程学院学报，1998,（19）:51-58.Guo F,Yang P R,Chang Q Y,et al. The solving multiple grid technology of Isothermal line contact elastohydrodynamic lubrication[J]. Journal of Qingdao Construction Engineering College, 1998,（19）:51-58.
［10］温诗铸.摩擦学原理[M].北京：清华大学出版社，1990.Wen S Z. Tribology Principles[M].Beijing: Tsinghua University Press,1990.

服务与反馈：

【文章下载】【加入收藏】