锻压技术

从《锻压技术》论文收录分析近十年塑性加工领域的发展

英文标题：Research on the development of plastic working technology based on the papers in the journal of Forging & Stamping Technology in the last ten years

作者：张雷

单位：北京机电研究所

关键词：塑性加工锻造板料成形特种成形装备与成套技术

分类号：TG3

出版年,卷(期):页码：2013,38(3):174-178

摘要：

简要概述了《锻压技术》杂志的发展及栏目变迁，以《锻压技术》杂志近十年所发表论文的相关数量及研究内容为基础，针对《锻压技术》杂志的 “锻造、板料成形、特种成形、装备与成套技术及计算机应用”等栏目，分析了我国塑性加工领域在技术与装备方面所取得的主要进展，并结合机械工业领域的发展趋势展望了塑性加工技术与装备未来的主要发展方向。

Based on the papers in the Journal of Forging & Stamping Technology in the last ten years, the main change about column title of the Journal catalog were discussed and summarized, and the main progresses in forging, sheet forming, special forming, equipment and complete technology and computer application in the column of the Journal were studied. With the trend of engineering industry development in the future, it was forecasted that the prospects for the characteristics and development trend in plastic working technology and equipment with in the next decade.

基金项目：

参考文献：

［1］周济.制造业数字化智能化[J].中国机械工程，2012,23(20):2395-2400.Zhou J. Digitization and intellectualization for manufacturing industries[J]. China Mechanical Engineering, 2012,23(20) :2395-2400.
［2］路甬祥.走向绿色和智能制造[J].中国机械工程,2010,21(4) :379-386.Lu Y X. Go green and intelligent manufacturing[J]. China Mechanical Engineering, 2010, 21(4):379-386.
［3］中国机械工程学会. 中国机械工程技术路线图[M], 北京：中国科学技术出版社，2011.Chinese Mechanical Engineering Society.Technology RoadMaps of Chinese Mechanical Engineering[M]. Beijing: China Science and Technology Press, 2011.
［4］王智文.汽车轻量化技术发展现状初探[J].汽车工艺与材料,2009,(2) :1-5.Wang Z W. Lightweight automotive technology development status of the[J].Automobile Technology & Material, 2009,(2):1-5.
［5］陈建军. 内高压工艺及其在汽车轻量化中的应用[J].锻压装备与制造技术,2010,(1) :12-17.Chen J J. Hydroforming technology and its application in weight-lightening process for automobile[J]. China Metal Forming Equipment & Manufacturing Technology, 2010,(1):12-17.
［6］张凯锋.《锻压技术》杂志纵横谈[J]. 锻压技术，2010,35（1）:1-3.Zhang K F. Comprehensive of Forging & Stamping Technology[J]. Forging & Stamping Technology, 2010,35(1):1-3.
［7］王仲仁，滕步刚，汤泽君.塑性加工技术新进展[J].中国机械工程,2009,20(1) :108-112.Wang Z R, Teng B G, Tang Z J. New development on technology of plasticity[J]. China Mechanical Engineering, 2009,20(1) :108-112.
［8］宋拥政，齐俊河. 中国金属成形行业的发展[J].锻压装备与制造技术,2009,(2) :13-19.Song Y Z, Qi J H. The development of the metal forming industry in China[J]. China Metal Forming Equipment & Manufacturing Technology, 2009,(2):13-19.
［9］刘华，闫洁，刘斌. 现代塑性加工新技术及发展趋势[J].锻压装备与制造技术,2010,(4) :10-14.Liu H,Yan J,Liu B. New technology and developing trend of modern plastic forming for metal[J]. China Metal Forming Equipment & Manufacturing Technology, 2010, (4):10-14.
［10］刘振堂. 我国锻压机械行业现状概况[J].锻压装备与制造技术,2011,(4) :9-15.Liu Z T. Status of national metalforming machinery industry[J]. China Metal Forming Equipment & Manufacturing Technology, 2011,(4):9-15.
［11］杨固川，于江，陈文，等.大型模锻液压机的工作压力及工作缸布置分析[J]. 锻压技术，2011,36（3）:77-79.Yang G C, Yu J, Chen W, et al. Analysis of hydraulic working pressure and arrangement of main working cylinder for large close\|die forging press[J]. Forging & Stamping Technology, 2011,36(3):77-79.
［12］孙友松，刘艳.材料加工技术创新与汽车轻量化[J]. 锻压技术，2007,32（5）:1-7.Sun Y S, Liu Y. Innovation in forming technologies and lightweight cars[J]. Forging & Stamping Technology, 2007,32(5):1-7.
［13］张长龙，邱林弟.锻锤在现代锻造工业中的复兴[J]. 锻压技术，2004,29（2）:53-55.Zhang C L, Qiu L D. Hammer in the revival of the modern forging industry[J]. Forging & Stamping Technology,2004,29(2):53-55.
［14］高俊峰.我国快锻液压机的发展与现状[J]. 锻压技术，2008,33（6）:1-5.Gao J F. Resent status and development of high\|speed forging hydraulic press in our country[J]. Forging & Stamping Technology,2008,33(6):1-5.
［15］张营杰，卫凌云，牛勇.锻造操作机发展现状与研究方向[J].锻压装备与制造技术,2012,(2) :11-13.Zhang Y J, Wei L Y, Niu Y. Developing status and trend of forging manipulator[J]. China Metal Forming Equipment & Manufacturing Technology,2012,(2):11-13.
［16］王玉山. 伺服机械压力机发展状况[J].锻压装备与制造技术,2010,(1) :29-31.Wang Y S. Status of development for servo mechanical press[J]. China Metal Forming Equipment & Manufacturing Technology,2010,(1):29-31.
［17］白宏伟，赵立伟，王玉成. 镁合金热塑性成形技术的研究现状[J].锻压装备与制造技术,2009,(2) :20-22.Bai H W, Zhao L W, Wang Y C. The research of warm hydro\|forming process of agnesium alloys[J]. China Metal Forming Equipment & Manufacturing Technology,2009,(2):20-22.

服务与反馈：

【文章下载】【加入收藏】