锻压技术

基于曲轴生产的锻压自动化生产线架构分析

英文标题：Analysis of automatic forging production line structure based on crankshaft production

作者：姜楠其尔曼刘国豹洪涛宫欣伟

单位：包头北奔重型汽车有限公司战略发展部南京汽轮电机（集团）有限责任公司北京机电研究所

分类号：TG316

出版年,卷(期):页码：2013,38(4):14-17

摘要：

根据曲轴生产特点，建立包括监控层、控制层、设备层的锻压自动化生产线架构，利用Profinet工业以太网以及基于Profibus-DP工业现场总线技术，通过对打击力和温度等参数进行监控和精确控制，达到提高生产节拍和制造质量的目的。实际生产应用表明，采用自动生产线生产曲轴，班产量达到700件，模具寿命达到5000件，节能达20%。

The network structure of automatic forging production line including monitor layer, control layer and equipment layer was presented based on crank shaft manufacturing. The production time and product quality were improved by monitoring and controlling the technical parameters, such as force and temperature with the help of Profinet and Profibus-DP. 700 pieces crank shafts could be produced in automatic forging line just in one shift. Meanwhile, die life was prolonged to 5000 pieces and energy was saved by 20%.

基金项目：

姜楠(1976-),女，本科，工程师

参考文献：

［1］迟春生,宫显宇,唐康.中国锻造行业的发展现状及趋势[J].金属加工,2010,(23):3-6.Chi C S, Gong X Y, Tang K. The developing state and trend of China forging industry[J].Metal Working,2010,(23):3-6.
［2］王忠雷,赵国群.精密锻造技术的研究现状及发展趋势[J].精密成形工程,2009,(1):40-46. Wang Z L, Zhao G Q. Recent condition and developing trends of precise forging technology[J].Journal of Netshape Forming Engineering,2009,(1):40-46.
［3］曾琦,蒋鹏, 任学平. 自动化锻造生产线在线监测技术[J].锻造与冲压,2013,(2):32-38. Zeng Q, Jiang P, Ren X P. Online monitoring technology for automatic forging line[J].Forging & Metalforming, 2013,(2):32-38.
［4］陈方泉,方文,马思文,等.关于PROFInet以太网现场总线的研究及应用[J].微计算机信息,2006,(25):37-39. Chen F Q, Fang W, Ma S W, et al. The research of PROFInet as the Fieldbus of Ethernet and its application[J]. Microcomputer Information,2006,(25):37-39.
［5］李红,李庆祥,张浩. 高能螺旋压力机新型控制系统研究[J].锻压技术,2013 ,38(2):98-100. Li H,Li Q X, Zhang H. Study on new control system of high energy screw press[J].Forging & Stamping Technology, 2013 ,38(2):98-100.
［6］段俊,黄明辉,湛利华,等.运用PLC和PID的液压机同步平衡系统的研究[J].锻压技术,2010 ,35(1):77-80. Duan J, Huang M H, Zhan L H, et al. Research on synchronous balancing system for hydraulic press based on PLC and PID[J].Forging & Stamping Technology,2010 ,35(1):77-80.
［7］王云飞,夏占雪,胡志高,等.曲轴先进锻造技术的研究与应用[J].锻压技术,2012,37(1):1-5. Wang Y F, Xia Z X, Hu Z G, et al.Study and application of advanced crankshaft forging technology[J].Forging & Stamping Technology,2012 ,37(1):1-5.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】