锻压技术

带气动切换机构的汽车顶盖翻边整形模设计

英文标题：Design of automotive roof flanging-sizing mold with pneumatic switching mechanism

作者：陈世涛阮林凡赵淮北

分类号：TG386

出版年,卷(期):页码：2013,38(4):101-105

摘要：

通过对汽车覆盖件的冲压工艺方案分析，介绍了一种带气动切换机构的汽车顶盖外板的冲压工艺方案，以及汽车顶盖的翻边整形模结构设计；实现了有天窗型顶盖和无天窗型顶盖外板的翻边整形工艺可以在同一副模具上进行生产的目的；重点讲述了顶盖翻边整形模结构、切换机构及工作原理。实际生产表明，该结构可降低模具开发成本，缩短模具切换时间，提高生产效率。

After analyzing the stamping process plan of auto cover, a stamping process analysis program of the car roof with skylight switching mechanism, as well as the car roof flanging-sizing mold design were introduced. The production purposes that the flanging-sizing process of skylight roof and no-skylight roof could be carried out in the same sub-mold were realized. The structure of the top cover flanging-sizing mold, the switching mechanism and its working principle were focused on. Actual production shows that the structure can reduce mold development costs, shorten the switching time and improve production efficiency.

基金项目：

陈世涛（1987-），男，学士，助理工程师

参考文献：

［1］董海，王宛山，崔金环.汽车顶盖工艺分析及模具设计[J].机械设计与制造，2005，(6):133-135. Dong H, Wang W S, Cui J H. Analysis of technique and design of die for mobile coping[J].Machinery Design & Manufacture, 2005，(6):133-135.
［2］瞿飞，王晨. 浅谈顶盖外板模具的气动快换装置[J]. 模具制造，2009，(7)：40-42. Qu F, Wang C. Discuss on pneumatic quick change mechanism of tip-cover out-plate die[J].Die & Mould Manufacture, 2009，(7)：40-42.
［3］郑金桥，黄勇，王义林，等. 汽车覆盖件冲压工艺设计现状及发展趋势[J].塑性工程学报，2003，10(6)：9-14. Zheng J Q, Huang Y, Wang Y L, et al. Present situation and prospects of stamping process planning for automobile panels[J]. Journal of Plasticity Engineering, 2003，10(6)：9-14.
［4］王聪.典型两厢汽车顶盖模具设计及调试案例[J].锻造与冲压，2010，（1）：73-78. Wang C. Typical cover mold hatchback design and debugging case[J].Foring & Metalforming，2010，(1)：73-78.
［5］史茂华.冲压模具设计过程中的关键要素[J].汽车工艺与材料，2011，（3）：44-58. Shi M H. Critical factors in the process of stamping tool design [J].Automobile Technology & Material, 2011，(3)：44-58.
［6］王孝培.实用冲压技术手册[M]. 北京：机械工业出版社，2001. Wang X P. Practical Handbook of Stamping Technology [M]. Beijing: China Mechine Press, 2001.
［7］王新华.冲模设计与制造实用计算手册[M].北京：机械工业出版社，2011. Wang X H. Handbook of Computational Design and Manufacture of Practical Die[M]. Beijing: China Mechine Press, 2011.
［8］现代模具技术编委会.汽车覆盖件模具设计与制造[M].北京：国防工业出版社，1998. Modern mold & Die Technology Editorial Board. The Dies Designing and Manufacturing of Auto Body Metal Sheet Parts[M]. Beijing: Academic Press,1998.
［9］向雄方.车身制件翻边整形模设计研究[J]. 模具工业,2009,35(2):33-36. Xiang X F. Design of flanging and sizing die for automobile body parts[J].Die & Mould Industry,2009,35(2):33-36.
［10］崔令江.汽车覆盖件冲压成形技术[M].北京：机械工业出版社，2003. Cui L J. Technology of Automobile Panel Stamping Forming [M]. Beijing: China Mechine Press, 2003.

服务与反馈：

【文章下载】【加入收藏】