锻压技术

月牙形孔手动分度冲裁模设计

英文标题：Blanking die design of manual scale mark for crescent hole

作者：孟少明聂慧萍陈晨

关键词：分度机构冲裁模定位精度

分类号：TG386

出版年,卷(期):页码：2013,38(4):116-119

摘要：

某航空用不锈钢叶轮盘零件需要冲压加工该零件上均布的25对月牙孔，并满足相应的孔位置尺寸要求。根据叶轮盘的零件特征，确定了工件的冲裁方案。采用独特的模具定位方式，通过高精度分度盘、定位轴与轴销三者的配合，设计了一种月牙形孔手动分度冲裁模机构，实现了对该零件上25个均布的月牙形孔手动分度冲压加工。生产结果表明，该冲裁模结构设计合理、操作方便，冲压加工的工件尺寸完全符合图纸设计要求。

As a stainless steel impeller disk used for aviation, 25 crescent holes are uniformly distributed on stamping part, and the size requirements of the hole positions should be met. According to the aviation parts feature, the blanking workpiece positioning scheme was determined, through the use of unique position mode and the coordination of high precision index plate,positioning shaft and shaft pin,a blanking die mechanism of manual scalemark for crescent hole was designed to realize the stamping of 25 uniform crescent shape holes. Production results show that the stamping die structure design is reasonable and convenient to operation. The size of workpiece in stamping processing fully meets the requirements of design drawings.

基金项目：

孟少明（1981-），男，学士，讲师

参考文献：

［1］陈剑鹤. 冷冲压工艺与模具设计[M].北京：机械工业出版社, 2012. Chen J H. Cold Stamping Process and Die Design[M]. Beijing:Machinery Industry Press, 2012.
［2］谭海林,朱慧芳,孟少明. 自动冲压线上定子扇形片模具设计与制造[J]. 锻压技术, 2012,37 (3): 98-101. Than H L,Zhu H H,Meng S M. Die design and manufacture of stator sector piece on automatic stamping line[J]. Forging & Stamping Technology, 2012,37 (3) : 98-101.
［3］张宏飞,伍宇红,聂和林.高压大电机转子冲片通风孔斜刃式冲裁模设计[J]. 锻压技术, 2010,35(2):106-108. Zhang H F,Wu Y H,Nie H L. Oblique cutting die design of large and high voltage generator rotor iron core sheet[J]. Forging & Stamping Technology, 2010,35(2):106-108.
［4］胡兆国，王如华. 电器零件冲压工艺及模具设计研究 [J]. 锻压技术, 2012,37 (3) : 104-108. Hu Z G,Wang R H. Study on stamping process and mold design of electrical part[J]. Forging & Stamping Technology, 2012,37 (3) : 104-108.
［5］周俊荣. 管夹典型零件连续模具设计[J]. 锻压技术,2011,36(1):97-99. Zhou J R. Design of progressive die for the typical parts of pipe clamp[J]. Forging & Stamping Technology, 2011,36(1):97-99.
［6］李淑玉,田福祥.汽车散热器罩修边-冲孔复合模设计[J]. 锻压技术,2011,36(1):100-102. Li S Y,Tian F X. Design of trimming and piercing compound die for radiator cover of automobile[J]. Forging & Stamping Technology, 2011,36(1):100-102.
［7］李淑玉,田福祥. 拉钩式自动送料冲孔落料级进模[J]. 锻压技术,2011,36:(2)95-96. Li S Y,Tian F X. Progressive die with automatic feed by hook for piercing and blanking[J]. Forging & Stamping Technology, 2011,36:(2)95-96.
［8］邓毅.24针顶壳多工位级进模具设计[J]. 锻压技术,2011,36(3):113-116. Deng Y. Design of the multi-position progressive die for the 24 pin top shell[J]. Forging & Stamping Technology, 2011,36(3):113-116.
［9］杨太德. 多孔盘冲压工艺与模具设计[J]. 锻压技术,2011,36(5):104-106. Yang T D. Pressing technology and die design of multi-hole plate[J]. Forging & Stamping Technology, 2011,36(5):104-106.
［10］常春,熊洪淼.拉码头多工位级进模设计[J]. 锻压技术,2010,35:(1)96-98. Chang C,Xiong H M. Design of multi-position progressive die for a zipper puller[J]. Forging & Stamping Technology, 2010,35:(1)96-98.

服务与反馈：

【文章下载】【加入收藏】