锻压技术

先进开卷落料线的工艺规划设计

英文标题：Process planning design of advanced uncoiler blanking line

作者：王平崔礼春马国礼

分类号：TG386

出版年,卷(期):页码：2013,38(4):190-192

摘要：

开卷落料线是一种适用于汽车、钢板配送等行业高档外饰卷板的板材加工设备。本文通过对开卷落料线各模块功能分析，论述了开卷落料线建线中的开卷输送系统设计、主要加工设备选用、堆垛装置设计等。开卷落料线的工艺规划设计应该充分考虑铝合金板材的应用。分析结果表明，钢铝混合开卷落料线的工艺规划设计可以满足未来生产线的发展需要，同时可以大大降低企业设备投资及生产区域面积。

Uncoiler blanking line is a plate processing equipment which is applied to the industry high-end exterior coil, such as automobile, steel distribution. Through analyzing each module function of the uncoiler blanking lines, uncoiler conveying system design, the main processing equipment selection, stacking device design etc. were discussed. The process planning design of blanking lines should fully consider the application of aluminum alloy sheet. The analysis results show that the process planning design of steel-aluminum mixed blanking lines not only can meet the development need of the production line in the future, but also can greatly reduce the equipment investment and the production area.

基金项目：

王平（1976-），女,硕士，工程师

参考文献：

［1］潘恩海.汽车用钢板开卷线发展方向[J].机械制造与自动化,2006,(5):64-65. Pan E H. The development direction of steel plate uncoiling line car [J]. Mechanical Manufacturing and Automation, 2006 ,(5): 64-65.
［2］郑俊峰. 伺服驱动器应用于高速开卷线[J]. 电气时代,2005,(8)：56-57. Zheng J F. Servo drive used in high-speed wire uncoiling [J]. Electric Age, 2005,(8): 56-57.
［3］张秀花. EMP630吨开卷落料线[J]. 汽车工艺与材料,2007,(9)：17-20. Zhang X H. EMP630 tons blanking lines [J]. Automotive Technology and Materials, 2007,(9): 17-20.
［4］张友兵，舒章钧，史旅华,等.基于伺服系统的开卷自动线送料系统[J].制造技术与机床,；
2005,(8)：43-47. Zhang Y B, Shu Z J, Shi L H,et al. Uncoiling line automatic feeding system based on servo system [J]. Manufacturing Technology and Machine,2005,(8):43-47.
［5］管俊，蒋国美，吉素云. 薄板横切开卷线中矫直机结构探讨[J].锻压装备与制造技术,2011,(3)：31-33. Guan J, Jiang G M, Ji S Y. The straightening machine structure discussion of the sheet crosscutting in uncoiling line[J]. Equipment & Manufacturing Technology, 2011,(3): 31-33.
［6］阮卫平，李建平，李振石.伺服压力机的研究及其发展前景[A].2009海峡两岸机械科技论坛论文集[C].海口,2009. Ruan W P, Li J P, Li Z S. The research and development prospect of servo press[A]. 2009 Cross-Straits Machinery Science and Technology Forum[C]. Haikou,2009.
［7］杨晋穗,赵玉敏.开卷线分条堆垛装置[J].锻压机械,2001,(2)：23-24. Yang J S, Zhao Y M. Uncoiling slitting stacking device [J]. Forging Machinery, 2001,(2): 23-24.
［8］邢宝勤，韩三峰，雷国福.钢板堆垛过程自动化控制实践[J].冶金设备,2008，14（3）：31-34. Xing B Q, Han S F, Lei G F. The steel plate stacking process automation control practice [J]. Metallurgical Equipment, 2008，14（3）：31-34.
［9］蔡军，贺本湖，陈景松,等. 现代轿车制造业中的开卷落料线[J].锻压机械,2002,(1)：10-12. Cai Jun, He B H, Chen J S,et al. The blanking lines in modern car manufacturing industry [J]. Forging Machinery, 2002,(1): 10-12.
［10］汪文奇.开卷落料模在汽车冲压生产中的应用[J].模具制造,2011,(2)：29-32. Wang W Q. The application of uncoiler blanking die in auto stamping production[J]. Die Manufacturing, 2011,(2)：29-32.

服务与反馈：

【文章下载】【加入收藏】