网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
HSHP-1000T液压机节能效应浅析
英文标题:Analysis of energy saving effect in HSHP-1000T hydraulic press
作者:裴华军 马国礼 崔礼春 
单位:安徽江淮汽车股份有限公司 
关键词:液压机 蓄能器 节能 
分类号:TG385.1+6
出版年,卷(期):页码:2013,38(5):142-144
摘要:

主要介绍了HSHP-1000T液压机的节能效应。基于常规液压机高能耗的弊端,简要阐述蓄能器的类型及应用优势,并在HSHP-1000T液压系统中创新采用气囊式蓄能器。针对是否安装蓄能器,通过计算两种情况的主机功率,分析蓄能器对液压系统的影响,对比说明蓄能器的引入,降低了液压机装机功率与使用成本,提高了设备稳定性。

The energy saving effect in HSHP-1000T hydraulic press was presented. Based on the disadvantage of high energy consumption of the conventional hydraulic press, the types of the accumulator and the application advantages were briefly described. And the pneumatic accumulator was used in the HSHP-1000T hydraulic system as an innovation. Through calculating the installed power and analyzing the accumulator influence to the hydraulic system, whether to install the accumulator or not was settled. The comparison shows that the introduction of accumulator could reduce the installed power for the hydraulic press, and improve the stability of the equipment.

基金项目:
作者简介:
裴华军(1987-),男,学士,工程师
参考文献:


[1]王卫卫,朱传祥,刘淑梅,等. 材料成型设备[M]. 北京:机械工业出版社,2004.Wang W W,Zhu C X,Liu S M,et al.Material Forming Equipment[M].Beijing:China Machine Press,2004.
[2]江琳. 液压蓄能器的应用[J]. 流体传动与控制,2006,(6):27-28.Jiang L,The application of hydraulic accumulator[J]. Fluid Power Transmission and Control,2006,(6):27-28.
[3]李广周. 蓄能器在Y41-500型油压机中的节能应用实践[J]. 创新技术,2011,(5):16-18.Li G Z, The application of accumulator in Y41-500 hydraulic press[J]. Tianjin Science & Technology,2011,(5):16-18.
[4]赵海峰. 蓄能器在液压系统中的应用[J]. 甘肃冶金,2011,(4):120-123. Zhao H F. The application of accumulator in hydraulic system[J]. Gansu Metallurgy,2011,(4):120-123.
[5]李浪,王海涛,龚烈航. 皮囊式蓄能器吸收压力脉动的参数分析与试验[J]. 液压与气动,2012,(7):3-6.Li L,Wang H T,Gong L H. The parameter analysis and experiment of the bladder accumulator absorbing pressure  pulsation[J].  Hydraulic & pneumatic,2012,(7):3-6.
[6]杨智韬,魏保华,瞿金平.蓄能器在全液压注塑机的应用以及节能效果研究[J].四川大学学报,2010,42(1):243-248. Yang Z T,Wei B H,Qu J P.Application of accumulator to entire hydraulic injection molding machine  and its energy-saving effect analysis[J]. Journal of Sichuan University:Engineering Science Edition,2010, 42(1):243-248.
[7]占仲恒. 皮囊式蓄能器的介绍与应用[J]. 涟钢科技与管理,2012,(4):21-24.Zhan Z H. The introduction and application of bag type accumulator[J]. The Technology and Management of  Lian Steel,2012,(4):21-24.
[8]王鑫,范霄神,李猛. 蓄能器在液压系统中的节能应用[J]. 科技创新与应用,2012,(5):48-48. Wang X,Fan X S,Li M. The application of accumulator in hydraulic system[J]. The Technology Innovate and  Application,2012,(5):48-48.
[9]马宪亭. 蓄能器在液压系统应用中合理性研究[J]. 煤矿机械,2011,32(9):204-205.Ma X T. Study of Rationality of application of accumulator in hydraulic system[J]. Coal Mine Machinery, 2011,32(9):204-205.

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管  中国机械总院集团北京机电研究所有限公司 中国机械工程学会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9